Stage 2
Stage 2 · Petrol · 1.2i 16v 75hp
Opel Corsa-C 1.7d Stage 2 file Delco Delco
Opel Corsa-C 1.7d 55.2 kW (75 HP) Delco Delco DYRU Stage 22004, 55.2 kW (75 hp)
75 → 87 HP +12 HP +21 Nm 16% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.2i 16v 75hp, Z12XE, 1.2L, Petrol. Engine #5604 in our gains database.
- Power
- 87 HP+12 HP from 75
- Torque
- 131 Nm+21 Nm from 110
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Delco.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Petrol.
Hardware
- Sport / decat downpipe (or sports-cat)
- High-flow air intake
- Optional: front-mount intercooler upgrade for sustained boost
Software / calibration
- Cat-warm-up & secondary lambda re-mapped for decat hardware
- Boost target raised in line with cooling capacity
- Knock / ignition advance re-trimmed
- Idle and load-transition tables refined
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Corsa |
| Model year | 2004 |
| Factory power | 55.2 kW (75 HP) |
| Calibration stage | Stage 2 |
| Cylinder capacity | 1199 CC |
| Compression ratio | 10,1 : 1 |
| Bore × Stroke | 72,5 X 72,6 mm |
| OEM engine code | Z12XE |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 75 HP | 110 Nm | — | — |
| Stage 1 | 82 HP | 125 Nm | +7 (9.3%) | +15 |
| Stage 2 | 87 HP | 131 Nm | +12 (16%) | +21 |
| Stage 3 | 124 HP | 171 Nm | +49 (65.3%) | +61 |
| Stage 4 | 146 HP | 204 Nm | +71 (94.7%) | +94 |
About this calibration file
The Stage 2 calibration for the 2004 Opel Corsa is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 87 HP and 131 Nm at the crank — a gain of +12 HP (16%) and +21 Nm over the factory 75 HP / 110 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for Opel Corsa-C 1.7d 2004 55.2KW with Delco Delco. The base stock vehicle for this calibration has a factory output of around 55.2 kW (~75 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Delco. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E7D9FA6F 0A68AE30 355C7E0D 5D77F565 178571BD DD612822 5BFBAB01 19C304A8