Stage 2
Opel Frontera 1.9 DTI Stage 2 file Bosch HW 0281010268
Opel Frontera 1.9 DTI 73.5 kW (100 HP) Stage 22004, 73.5 kW (100 hp)
Calibrated ECU file for 0281010268. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281010268.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2.
Hardware
- Sport / decat downpipe (or sports-cat)
- High-flow air intake
- Optional: front-mount intercooler upgrade for sustained boost
Software / calibration
- Cat-warm-up & secondary lambda re-mapped for decat hardware
- Boost target raised in line with cooling capacity
- Knock / ignition advance re-trimmed
- Idle and load-transition tables refined
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Frontera |
| Model year | 2004 |
| Displacement | 1.9 L |
| Factory power | 73.5 kW (100 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281010268 |
| Calibration stage | Stage 2 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
About this calibration file
The Stage 2 calibration for the 2004 Opel Frontera 1.9L is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0281010268. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281010268 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for Opel Frontera 1.9 DTI 2004 73.5KW with Bosch 0281010268. The base stock vehicle for this calibration has a factory output of around 73.5 kW (~100 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010268. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
CE0A8746 21A09314 EF155FC5 767AB610 4B2117F5 5A026279 4FC7B343 1FFF38E7