Stage 3
Stage 3 · Petrol · 2.0 Turbo 175hp
Opel Vectra-A 2.5 Stage 3 file Bosch HW 0261203080 · SW 358299
Opel Vectra-A 2.5 Petrol 125 kW (170 HP) Stage 32004, Petrol, 125 kW (170 hp)
175 → 289 HP +114 HP +138 Nm 65% more power
Calibrated ECU file for 0261203080 (SW 358299). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 Turbo 175hp, Z20LET, 2L, Petrol. Engine #5749 in our gains database.
- Power
- 289 HP+114 HP from 175
- Torque
- 388 Nm+138 Nm from 250
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261203080 and software 358299.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 3, Petrol.
Hardware
- Hybrid or larger turbocharger
- Upgraded high-pressure fuel pump and / or injectors
- Front-mount intercooler upgrade
- Sport / decat downpipe + free-flow exhaust
- High-flow air intake
- Uprated clutch (manual gearbox)
Software / calibration
- Custom map dialled to the installed turbo, injector and intercooler spec
- Boost, fuelling, ignition / injection timing rebuilt around the new hardware
- All safety limits (knock, EGT, lambda, rail) re-tuned to match
- Drivability and torque-by-gear shaped to match the hardware
Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build: typical projection above is a guide, final dyno depends on installed hardware.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Opel |
|---|---|
| Vehicle model | Vectra |
| Model year | 2004 |
| Displacement | 2.5 L |
| Fuel / Induction | Petrol |
| Factory power | 125 kW (170 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261203080 |
| ECU software | 358299 |
| Calibration stage | Stage 3 |
| Cylinder capacity | 1998 CC |
| Compression ratio | 9,5 : 1 |
| Bore × Stroke | 86,0 X 86,0 mm |
| OEM engine code | Z20LET |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 175 HP | 250 Nm | — | — |
| Stage 1 | 210 HP | 300 Nm | +35 (20%) | +50 |
| Stage 2 | 223 HP | 315 Nm | +48 (27.4%) | +65 |
| Stage 3 | 289 HP | 388 Nm | +114 (65.1%) | +138 |
| Stage 4 | 341 HP | 463 Nm | +166 (94.9%) | +213 |
About this calibration file
The Stage 3 calibration for the 2004 Opel Vectra 2.5L Petrol targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.
This file matches a Bosch ECU with hardware number 0261203080 and software version 358299. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 289 HP and 388 Nm at the crank — a gain of +114 HP (65%) and +138 Nm over the factory 175 HP / 250 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261203080 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage3 tuning file for Opel Vectra-A 2.5 2004 Benzin 125KW with Bosch 0261203080 and software ID C25XE (Bosch software number 358299 ( 1037358299 )). The base stock vehicle for this calibration has a factory output of around 125 kW (~170 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261203080, C25XE, 358299 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
4E7557F8 FA9E26BE C00DB9F0 E7E27C8B 564365F2 B5086388 27C3E221 CEA3C9F0