Instant download
Peugeot 307 2.0 HDI original file Siemens/Continental HW 5WS40276 · PO20034000000
Turbo diesel · 136 hp (100 kW)
Choose your file
Dyno sheet
- Power
- 136 hp
- Torque
- 320 Nm
Typical crank figures for a healthy 2.0 HDI. Results depend on the car's condition, fuel and parts.
- Power
- 136 hp 100 kW
- ECU
- Siemens/Continental
- Engine
- 2.0 HDI Turbo diesel · 1,997 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Siemens/Continental on the Peugeot 307 2.0 HDI
Software and hardware
- Hardware
- 5WS40276 Siemens/Continental's number for the ECU itself, on its label
- Software ID
- PO20034000000 The software's own ID, in the file
How the Siemens/Continental is read: OBD and Bench
Older tools
Built on request for the Peugeot 307 2.0 HDI
- DPF off
- EGR off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 5WS40276 and software ID PO20034000000
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 5WS40276 and software ID PO20034000000, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the Peugeot 307 2.0 HDI (100 kW, 136 hp), for its Siemens/Continental ECU with hardware 5WS40276 and software ID PO20034000000. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The Peugeot 307 2.0 HDI carries the 2.0 HDI engine, 136 hp and 320 Nm from the factory. On this engine, Stage 1 usually gives about 162 hp and 367 Nm (+26 hp, +47 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For this calibration of the Peugeot 307 2.0 HDI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Siemens/Continental ECU in this car is read and written over OBD and on the bench, with tools such as Alientech K-Tag, Autotuner, CMD Flash, Dimsport New Trasdata and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 2.0 HDI engine with the same ECU is fitted to the Citroën Picasso / C4 Picasso: their file can be the same, so check the software number of your read.
DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 5WS40276 is the number on the Siemens/Continental ECU's label. Software ID PO20034000000 names that calibration in your tool's read.
Questions
Which ECU does this Peugeot 307 2.0 HDI original file fit?
A Siemens/Continental ECU with hardware 5WS40276 and software ID PO20034000000. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Siemens/Continental ECU read and written?
Over OBD and on the bench, with tools such as Alientech K-Tag, Autotuner, CMD Flash, Dimsport New Trasdata and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Peugeot 307 2.0 HDI?
Usually about 162 hp and 367 Nm against 136 hp and 320 Nm stock (+26 hp, +47 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Siemens/Continental ECU file?
Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand