Stage 2
Stage 2 · Diesel · 1.9 DTi 80hp
Renault Clio 1.5 DCI Stage 2 file Delphi
Renault Clio 1.5 DCI Turbo Diesel 60.3 kW (82 HP) Stage 22004, Turbo diesel, 60.3 kW (82 hp)
80 → 114 HP +34 HP +75 Nm 43% more power
Calibrated ECU file for 8200331477. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.9 DTi 80hp, F9Q, 1.9L, Diesel. Engine #6294 in our gains database.
- Power
- 114 HP+34 HP from 80
- Torque
- 235 Nm+75 Nm from 160
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 8200331477.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Renault |
|---|---|
| Vehicle model | Clio |
| Model year | 2004 |
| Displacement | 1.5 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 60.3 kW (82 HP) |
| ECU manufacturer | Delphi |
| ECU hardware | 8200331477 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 1870 CC |
| Compression ratio | 18,3 : 1 |
| Bore × Stroke | 80,0 X 93,0 mm |
| OEM engine code | F9Q |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 80 HP | 160 Nm | — | — |
| Stage 1 | 105 HP | 200 Nm | +25 (31.3%) | +40 |
| Stage 2 | 114 HP | 235 Nm | +34 (42.5%) | +75 |
| Stage 3 | 120 HP | 248 Nm | +40 (50%) | +88 |
| Stage 4 | 144 HP | 296 Nm | +64 (80%) | +136 |
About this calibration file
The Stage 2 calibration for the 2004 Renault Clio 1.5L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Delphi ECU with hardware number 8200331477. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 114 HP and 235 Nm at the crank — a gain of +34 HP (43%) and +75 Nm over the factory 80 HP / 160 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
8200331477 (Delphi) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for Renault Clio 1.5 DCI 2004 Turbodiesel 60.3KW with Delphi 8200331477. The base stock vehicle for this calibration has a factory output of around 60.3 kW (~82 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 8200331477. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
15D73864 A6CB7086 CC875934 77093698 BB1D89A3 852CC58D 82FE43FC 1CA3FCF0