Stage 1
Stage 1 · Diesel · 1.5 DCi 100hp
Renault Megane 1.5 DCI Stage 1 file Bosch
Renault Megane 1.5 DCI Turbo Diesel 74.3 kW (101 HP) Stage 1Turbo diesel, 74.3 kW (101 hp)
100 → 125 HP +25 HP +50 Nm 25% more power
Calibrated ECU file for R0410B024B. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.5 DCi 100hp, K9K, 1.5L, Diesel. Engine #6419 in our gains database.
- Power
- 125 HP+25 HP from 100
- Torque
- 250 Nm+50 Nm from 200
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 8200.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Renault |
|---|---|
| Vehicle model | Megane |
| Displacement | 1.5 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 74.3 kW (101 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | R0410B024B |
| Calibration stage | Stage 1 |
| OEM engine code | K9K |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 100 HP | 200 Nm | — | — |
| Stage 1 | 125 HP | 250 Nm | +25 (25%) | +50 |
| Stage 2 | 142 HP | 294 Nm | +42 (42%) | +94 |
| Stage 3 | 150 HP | 310 Nm | +50 (50%) | +110 |
| Stage 4 | 180 HP | 370 Nm | +80 (80%) | +170 |
About this calibration file
The Stage 1 calibration for the Renault Megane 1.5L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number R0410B024B. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 125 HP and 250 Nm at the crank — a gain of +25 HP (25%) and +50 Nm over the factory 100 HP / 200 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
R0410B024B (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Renault Megane 1.5 DCI Turbodiesel 74.3KW with Bosch 8200 and software ID R0410B024B. The base stock vehicle for this calibration has a factory output of around 74.3 kW (~101 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 8200, R0410B024B. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
0E3177E9 E0772C50 0EB456C7 5AC1B1DF 08B93699 5ADB187C B1071CC8 35CC2E72