Stage 3
Stage 3 · Petrol · RS 2.0 Turbo R26R 230hp
Renault Megane 2 2.0 Turbo Stage 3 file Sagem
Renault Megane 2 2.0 Turbo Turbo Petrol 164.8 kW (224 HP) Stage 32004, Turbo petrol, 164.8 kW (224 hp)
230 → 380 HP +150 HP +171 Nm 65% more power
Calibrated ECU file for 8200681821. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: RS 2.0 Turbo R26R 230hp, F4R 27, 2L, Petrol. Engine #6425 in our gains database.
- Power
- 380 HP+150 HP from 230
- Torque
- 481 Nm+171 Nm from 310
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Sagem.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 3, Petrol.
Hardware
- Hybrid or larger turbocharger
- Upgraded high-pressure fuel pump and / or injectors
- Front-mount intercooler upgrade
- Sport / decat downpipe + free-flow exhaust
- High-flow air intake
- Uprated clutch (manual gearbox)
Software / calibration
- Custom map dialled to the installed turbo, injector and intercooler spec
- Boost, fuelling, ignition / injection timing rebuilt around the new hardware
- All safety limits (knock, EGT, lambda, rail) re-tuned to match
- Drivability and torque-by-gear shaped to match the hardware
Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build: typical projection above is a guide, final dyno depends on installed hardware.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Renault |
|---|---|
| Vehicle model | Megane |
| Model year | 2004 |
| Displacement | 2.2 L |
| Fuel / Induction | Petrol |
| Factory power | 164.8 kW (224 HP) |
| ECU manufacturer | Sagem |
| ECU hardware | 8200681821 |
| Calibration stage | Stage 3 |
| Cylinder capacity | 1998 CC |
| Compression ratio | 9,0 : 1 |
| Bore × Stroke | 82,7 X 93,0 mm |
| OEM engine code | F4R 27 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 230 HP | 310 Nm | — | — |
| Stage 1 | 255 HP | 360 Nm | +25 (10.9%) | +50 |
| Stage 2 | 322 HP | 450 Nm | +92 (40%) | +140 |
| Stage 3 | 380 HP | 481 Nm | +150 (65.2%) | +171 |
| Stage 4 | 449 HP | 574 Nm | +219 (95.2%) | +264 |
About this calibration file
The Stage 3 calibration for the 2004 Renault Megane 2.2L Petrol targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.
This file matches a Sagem ECU with hardware number 8200681821. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 380 HP and 481 Nm at the crank — a gain of +150 HP (65%) and +171 Nm over the factory 230 HP / 310 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
8200681821 (Sagem) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage3 tuning file for Renault Megane 2 2.0 Turbo 2004 Turbo-Benzin 164.8KW with Sagem Sagem. The base stock vehicle for this calibration has a factory output of around 164.8 kW (~224 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Sagem. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
9394A509 FB7DC119 645B655C 48BAD220 358C75FE BA0372CC A02952E3 2AA8C463