Original file
Original / Factory · Diesel · 2.0 CDTI 115hp
Rover 75 2.0 CDT 2.0 original file Bosch · SW 351065
Rover 75 2.0 CDT 2.0 Turbo Diesel 84.6 kW (115 HP) OriginalTurbo diesel, 84.6 kW (115 hp)
115 HP Factory calibration Stock backup file, 260 Nm, Diesel
Calibrated ECU file for (SW 7785541). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 CDTI 115hp, 2L, Diesel. Engine #6557 in our gains database.
- Power
- 115 HPfactory calibration
- Torque
- 260 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 7785541 and software 351065.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Rover |
|---|---|
| Vehicle model | 75 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 84.6 kW (115 HP) |
| ECU manufacturer | Bosch |
| ECU software | 7785541 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1951 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 84,0 X 88,0 mm |
| OEM engine code | 2.0 CDTI 115hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 115 HP | 260 Nm | — | — |
| Stage 1 | 142 HP | 302 Nm | +27 (23.5%) | +42 |
| Stage 2 | 163 HP | 382 Nm | +48 (41.7%) | +122 |
| Stage 3 | 173 HP | 403 Nm | +58 (50.4%) | +143 |
| Stage 4 | 207 HP | 481 Nm | +92 (80%) | +221 |
About this calibration file
This is the factory (original) ECU calibration for the Rover 75 2.0L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU and software version 7785541. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for Rover 75 2.0 CDT 2.0 Turbodiesel 84.6KW with Bosch 7785541 (Bosch software number 351065 ( 1037351065 )). This original file corresponds to a factory engine output of approximately 84.6 kW (~115 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 7785541, 351065 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
8C898C96 F005FAFB EDE472AF 78EA6B43 1D67C48A 7ECFE55D C7C07263 5848CD13