Stage 1
Stage 1 · Petrol · 1.4i 16v 100hp
Seat Ibiza 1.4 16V Stage 1 file Marelli · 036906034DG
Seat Ibiza 1.4 16V 73.5 kW (100 HP) Marelli iaw4mv.DGN 036906034DG 9E67 Checksumme Stage 12004, 73.5 kW (100 hp)
100 → 110 HP +10 HP +14 Nm 10% more power
Calibrated ECU file for 036906034DG. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.4i 16v 100hp, AUB, 1.4L, Petrol. Engine #6751 in our gains database.
- Power
- 110 HP+10 HP from 100
- Torque
- 140 Nm+14 Nm from 126
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware iaw4mv.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Seat |
|---|---|
| Vehicle model | Ibiza |
| Model year | 2004 |
| Displacement | 1.4 L |
| Factory power | 73.5 kW (100 HP) |
| ECU manufacturer | Magneti Marelli |
| ECU ID | IAW4MV.DGN |
| ECU hardware | 036906034DG |
| ECU software | 9E67 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1391 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 76,5 X 75,6 mm |
| OEM engine code | AUB |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 100 HP | 126 Nm | — | — |
| Stage 1 | 110 HP | 140 Nm | +10 (10%) | +14 |
| Stage 2 | 117 HP | 147 Nm | +17 (17%) | +21 |
| Stage 3 | 165 HP | 195 Nm | +65 (65%) | +69 |
| Stage 4 | 195 HP | 233 Nm | +95 (95%) | +107 |
About this calibration file
The Stage 1 calibration for the 2004 Seat Ibiza 1.4L is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Magneti Marelli ECU with hardware number 036906034DG and software version 9E67. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 110 HP and 140 Nm at the crank — a gain of +10 HP (10%) and +14 Nm over the factory 100 HP / 126 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
036906034DG (Magneti Marelli) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Seat Ibiza 1.4 16V 2004 73.5KW with Marelli iaw4mv.DGN and software ID 036906034DG. The base stock vehicle for this calibration has a factory output of around 73.5 kW (~100 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as iaw4mv.DGN, 036906034DG. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
BFB7D37F 8B3CC5F5 62A82DB4 8B16C06D 6484498C FA53BC91 56421008 939F8D3C