Stage 3
Stage 3 · Petrol · 1.8T 20v 150hp
Seat Ibiza 1.8 T Stage 3 file Bosch HW 0261207071 · 6K0906032AA · SW 354562
Seat Ibiza 1.8 T Turbo Petrol 114.7 kW (156 HP) Stage 32002, Turbo petrol, 114.7 kW (156 hp)
150 → 248 HP +98 HP +132 Nm 65% more power
Calibrated ECU file for 0261207071 (SW 354562). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.8T 20v 150hp, BJX, 1.8L, Petrol. Engine #6755 in our gains database.
- Power
- 248 HP+98 HP from 150
- Torque
- 352 Nm+132 Nm from 220
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261207071 and software 354562.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 3, Petrol.
Hardware
- Hybrid or larger turbocharger
- Upgraded high-pressure fuel pump and / or injectors
- Front-mount intercooler upgrade
- Sport / decat downpipe + free-flow exhaust
- High-flow air intake
- Uprated clutch (manual gearbox)
Software / calibration
- Custom map dialled to the installed turbo, injector and intercooler spec
- Boost, fuelling, ignition / injection timing rebuilt around the new hardware
- All safety limits (knock, EGT, lambda, rail) re-tuned to match
- Drivability and torque-by-gear shaped to match the hardware
Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build: typical projection above is a guide, final dyno depends on installed hardware.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Seat |
|---|---|
| Vehicle model | Ibiza |
| Model year | 2002 |
| Displacement | 1.8 L |
| Fuel / Induction | Petrol |
| Factory power | 114.7 kW (156 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 6K0906032AA |
| ECU hardware | 0261207071 |
| ECU software | 354562 |
| Calibration stage | Stage 3 |
| Cylinder capacity | 1781 CC |
| Compression ratio | 9,5 : 1 |
| Bore × Stroke | 81,0 X 86,4 mm |
| OEM engine code | BJX |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 150 HP | 220 Nm | — | — |
| Stage 1 | 192 HP | 310 Nm | +42 (28%) | +90 |
| Stage 2 | 210 HP | 335 Nm | +60 (40%) | +115 |
| Stage 3 | 248 HP | 352 Nm | +98 (65.3%) | +132 |
| Stage 4 | 293 HP | 407 Nm | +143 (95.3%) | +187 |
About this calibration file
The Stage 3 calibration for the 2002 Seat Ibiza 1.8L Petrol targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.
This file matches a Bosch ECU with hardware number 0261207071 and software version 354562. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 248 HP and 352 Nm at the crank — a gain of +98 HP (65%) and +132 Nm over the factory 150 HP / 220 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261207071 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage3 tuning file for Seat Ibiza 1.8 T 2002 Turbo-Benzin 114.7KW with Bosch 0261207071 and software ID 6K0906032AA (Bosch software number 354562 ( 1037354562 )). The base stock vehicle for this calibration has a factory output of around 114.7 kW (~156 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261207071, 6K0906032AA, 354562 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
579BF648 88063DC9 5947E373 DD43FFEA 68891C0D 30E2C75D D3883DDC 89333BB6