Stage 3
Seat Leon Cupra 1.8T Stage 3 file Bosch HW 0261208115 · 06A906032MJ · SW 366379
Seat Leon Cupra 1.8T Turbo Petrol 132.4 kW (180 HP) Stage 32002, Turbo petrol, 132.4 kW (180 hp)
Calibrated ECU file for 0261208115 (SW 366379). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261208115 and software 366379.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 3.
Hardware
- Hybrid or larger turbocharger
- Upgraded high-pressure fuel pump and / or injectors
- Front-mount intercooler upgrade
- Sport / decat downpipe + free-flow exhaust
- High-flow air intake
- Uprated clutch (manual gearbox)
Software / calibration
- Custom map dialled to the installed turbo, injector and intercooler spec
- Boost, fuelling, ignition / injection timing rebuilt around the new hardware
- All safety limits (knock, EGT, lambda, rail) re-tuned to match
- Drivability and torque-by-gear shaped to match the hardware
Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build: typical projection above is a guide, final dyno depends on installed hardware.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Seat |
|---|---|
| Vehicle model | Leon Cupra |
| Model year | 2002 |
| Fuel / Induction | Petrol |
| Factory power | 132.4 kW (180 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261208115 |
| ECU software | 366379 |
| Calibration stage | Stage 3 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
About this calibration file
The Stage 3 calibration for the 2002 Seat Leon Cupra Petrol targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.
This file matches a Bosch ECU with hardware number 0261208115 and software version 366379. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261208115 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage3 tuning file for Seat Leon Cupra 1.8T 2002 Turbo-Benzin 132.4KW with Bosch 0261208115 and software ID 06A906032MJ (Bosch software number 366379 ( 1037366379 )). The base stock vehicle for this calibration has a factory output of around 132.4 kW (~180 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261208115, 06A906032MJ, 366379 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
4039AD58 93126656 88874FF1 C315B30D 3C7913F8 45DAEED8 5E753730 5EB6C552