Stage 1
Stage 1 · Petrol · 1.4 TSI 122hp
Skoda New Octavia 1.4 TSI Stage 1 file Bosch HW 0261S06485 · 03C906016AQ · SW 516946
Skoda New Octavia 1.4 TSI Turbo Petrol 91.9 kW (125 HP) Stage 12012, Turbo petrol, 91.9 kW (125 hp)
122 → 155 HP +33 HP +70 Nm 27% more power
Calibrated ECU file for 0261S06485 (SW 516946). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.4 TSI 122hp, CAXA, 1.4L, Petrol. Engine #6966 in our gains database.
- Power
- 155 HP+33 HP from 122
- Torque
- 270 Nm+70 Nm from 200
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261S06485 and software 516946.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Skoda |
|---|---|
| Vehicle model | New Octavia |
| Model year | 2012 |
| Displacement | 1.4 L |
| Fuel / Induction | TSI (Turbo Petrol) |
| Factory power | 91.9 kW (125 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261S06485 |
| ECU software | 516946 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1390 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 76,0 X 75,6 mm |
| OEM engine code | CAXA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 122 HP | 200 Nm | — | — |
| Stage 1 | 155 HP | 270 Nm | +33 (27%) | +70 |
| Stage 2 | 160 HP | 268 Nm | +38 (31.1%) | +68 |
| Stage 3 | 201 HP | 310 Nm | +79 (64.8%) | +110 |
| Stage 4 | 238 HP | 370 Nm | +116 (95.1%) | +170 |
About this calibration file
The Stage 1 calibration for the 2012 Skoda New Octavia 1.4L TSI (Turbo Petrol) is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0261S06485 and software version 516946. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 155 HP and 270 Nm at the crank — a gain of +33 HP (27%) and +70 Nm over the factory 122 HP / 200 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261S06485 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Skoda New Octavia 1.4 TSI 2012 Turbo-Benzin 91.9KW with Bosch 0261S06485 and software ID 03C906016AQ (Bosch software number 516946 ( 1037516946 )). The base stock vehicle for this calibration has a factory output of around 91.9 kW (~125 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261S06485, 03C906016AQ, 516946 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
A9AB4BB1 13EFB3AC 7B4F1D31 220B27FB C4C01233 8141E141 9FD1C1D8 A680386C