Instant download
VW Transporter 2.5 TDI Stage 2 file Bosch HW 0281010088 · 074906021AG · SW 350892
2002 · Turbo diesel · 102 hp (75 kW)
Choose your file
Dyno sheet
- Power
- 102 hp
- Torque
- 250 Nm
Typical crank figures for a healthy 2.5 TDI. Results depend on the car's condition, fuel and parts.
- Power
- 102 hp 75 kW
- ECU
- Bosch
- Engine
- 2.5 TDI Turbo diesel
- File
- 256 KB BIN, ready to write
Bosch on the VW Transporter 2.5 TDI
Software and hardware
- Hardware
- 0281010088 Bosch's number for the ECU itself, on its label printed 0 281 010 088
- Part number
- 074906021AG Volkswagen's part number for this ECU, printed 074 906 021 AG
- Software
- 350892 The software inside: your read must show this number
How the Bosch is read: OBD and Bench
Older tools
Built on request for the VW Transporter 2.5 TDI
- EGR off
- DTC off
- Speed limiter (Vmax) off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0281010088, part number 074906021AG and software 350892
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0281010088, part number 074906021AG and software 350892, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 2 file is
This is a Stage 2 tune of the factory calibration of the 2002 VW Transporter 2.5 TDI (75 kW, 102 hp), for its Bosch ECU with hardware 0281010088, part number 074906021AG and software 350892. Stage 2 is written for a car with supporting parts fitted; if yours differ from the usual build, we match the file to them.
Stage 2 on the 2.5 TDI goes further than Stage 1 and expects supporting parts: a freer exhaust or downpipe, a bigger intercooler and a clutch rated for the torque. Fit them first; on a standard car a Stage 2 file asks more than the parts give.
The VW Transporter 2.5 TDI carries the 2.5 TDI engine, 102 hp and 250 Nm from the factory. On this engine, Stage 1 usually gives about 137 hp and 310 Nm (+35 hp, +60 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 350892 of the VW Transporter 2.5 TDI we sell the original, Stage 1 and Stage 2. Stage 1 and Stage 2 each come in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, CMD Flash, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
EGR off, DTC off and speed limiter (Vmax) off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0281010088 is the number on the Bosch ECU's label. Software 350892 is the calibration inside it: a read with hardware 0281010088 and another software number needs a different file. Part number 074906021AG is the car maker's number for this ECU.
Questions
Which ECU does this VW Transporter 2.5 TDI Stage 2 file fit?
A Bosch ECU with hardware 0281010088, part number 074906021AG and software 350892. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ECU read and written?
Over OBD and on the bench, with tools such as Autotuner, CMD Flash, Dimsport New Genius and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Transporter 2.5 TDI?
Usually about 137 hp and 310 Nm against 102 hp and 250 Nm stock (+35 hp, +60 Nm). Typical for a healthy engine, never a promise for one car.
Can you add EGR off to the Bosch ECU file?
Yes, on request, for off-road and competition use: EGR off, DTC off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 256 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand