Instant download
VW Touran 2.0 TDI CR Stage 1 file Bosch EDC17 · 03L906022G · SW 396096
2009 · Turbo diesel · 140 hp (103 kW)
Choose your file
Dyno sheet
- Power
- 185 hp +45
- Torque
- 400 Nm +80
Typical crank figures for a healthy 2.0 TDI CR. Results depend on the car's condition, fuel and parts.
- Power
- 140 hp 103 kW
- ECU
- Bosch EDC17
- Engine
- 2.0 TDI CR Turbo diesel · 1,968 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Bosch EDC17 on the VW Touran 2.0 TDI CR
Software and hardware
- Part number
- 03L906022G Volkswagen's part number for this ECU, printed 03L 906 022 G
- Software
- 396096 (1037396096) The software inside: your read must show this number
How the Bosch EDC17 is read: OBD, Bench and Boot
Older tools
Built on request for the VW Touran 2.0 TDI CR
- DPF off
- EGR off
- DTC off
- Speed limiter (Vmax) off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 03L906022G and software 396096
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 03L906022G and software 396096 (1037396096), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2009 VW Touran 2.0 TDI CR (103 kW, 140 hp), for its Bosch EDC17 ECU with part number 03L906022G and software 396096 (1037396096). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 2.0 TDI CR raises the injected fuel, the boost and the rail pressure and lifts the torque limiters, within what the standard turbo, injectors and clutch hold. The smoke limiter follows the new airflow, so a healthy engine pulls harder without black smoke.
The VW Touran 2.0 TDI CR carries the 2.0 TDI CR engine, 140 hp and 320 Nm from the factory. On this engine, Stage 1 usually gives about 185 hp and 400 Nm (+45 hp, +80 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 396096 of the VW Touran 2.0 TDI CR we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Bosch EDC17 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 2.0 TDI CR engine with the same ECU is fitted to the Seat Altea XL, Seat Leon 1P, Skoda Octavia II, Skoda Yeti, Volkswagen Caddy III (facelift 2010), Volkswagen Caddy IV and Volkswagen Golf VII: their file can be the same, so check the software number of your read.
DPF off, EGR off, DTC off and speed limiter (Vmax) off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 396096 (1037396096) is the calibration inside the Bosch ECU. Part number 03L906022G is the car maker's number for this ECU.
Questions
Which ECU does this VW Touran 2.0 TDI CR Stage 1 file fit?
A Bosch EDC17 ECU with part number 03L906022G and software 396096 (1037396096). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC17 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Touran 2.0 TDI CR?
Usually about 185 hp and 400 Nm against 140 hp and 320 Nm stock (+45 hp, +80 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch EDC17 file?
Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
Does software 396096 fit other cars?
We also sell this software for the VW Tiguan 2.0 TDI CR. The hardware number on your ECU decides whether the same file fits: match it before you write.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand