Instant download
VW Touran 1.6 FSI Stage 1 file Bosch MED9510 HW 0261S02152 · 03C906056CE · SW 374349
2002 · Petrol · 115 hp (85 kW)
Choose your file
Dyno sheet
- Power
- 125 hp +10
- Torque
- 170 Nm +15
Typical crank figures for a healthy 1.6 FSI. Results depend on the car's condition, fuel and parts.
- Power
- 115 hp 85 kW
- ECU
- Bosch MED9510
- Engine
- 1.6 FSI Petrol
- File
- 2 MB BIN, ready to write
Bosch MED9510 on the VW Touran 1.6 FSI
Software and hardware
- Hardware
- 0261S02152 Bosch's number for the ECU itself, on its label printed 0 261 S02 152
- Part number
- 03C906056CE Volkswagen's part number for this ECU, printed 03C 906 056 CE
- Software
- 374349 (1037374349) The software inside: your read must show this number
How the Bosch MED9510 is read: OBD and Bench
Older tools
Built on request for the VW Touran 1.6 FSI
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Pops and bangs
- Anti-lag
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261S02152, part number 03C906056CE and software 374349
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261S02152, part number 03C906056CE and software 374349 (1037374349), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2002 VW Touran 1.6 FSI (85 kW, 115 hp), for its Bosch MED9510 ECU with hardware 0261S02152, part number 03C906056CE and software 374349 (1037374349). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 1.6 FSI refines the ignition timing and the fuelling across the rev range; on an engine without a turbo the gain is modest, the throttle answers sooner.
The VW Touran 1.6 FSI carries the 1.6 FSI engine, 115 hp and 155 Nm from the factory. On this engine, Stage 1 usually gives about 125 hp and 170 Nm (+10 hp, +15 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 374349 of the VW Touran 1.6 FSI we sell the original, Stage 1 and Stage 2. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch MED9510 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, bFlash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261S02152 is the number on the Bosch ECU's label. Software 374349 (1037374349) is the calibration inside it: a read with hardware 0261S02152 and another software number needs a different file. Part number 03C906056CE is the car maker's number for this ECU.
Questions
Which ECU does this VW Touran 1.6 FSI Stage 1 file fit?
A Bosch MED9510 ECU with hardware 0261S02152, part number 03C906056CE and software 374349 (1037374349). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch MED9510 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and bFlash. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Touran 1.6 FSI?
Usually about 125 hp and 170 Nm against 115 hp and 155 Nm stock (+10 hp, +15 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch MED9510 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand