Instant download
VW Passat 2.0 TDI CR Stage 1 file Bosch EDC17 · 03L906012AA · SW 527066
2013 · Turbo diesel · 179 hp (132 kW)
Choose your file
Dyno sheet
- Power
- 215 hp +38
- Torque
- 430 Nm +50
Typical crank figures for a healthy 2.0 TDI CR. Results depend on the car's condition, fuel and parts.
- Power
- 179 hp 132 kW
- ECU
- Bosch EDC17
- Engine
- 2.0 TDI CR Turbo diesel · 1,968 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Bosch EDC17 on the VW Passat 2.0 TDI CR
Software and hardware
- Part number
- 03L906012AA Volkswagen's part number for this ECU, printed 03L 906 012 AA
- Software
- 527066 (1037527066) The software inside: your read must show this number
How the Bosch EDC17 is read: OBD, Bench and Boot
Older tools
Built on request for the VW Passat 2.0 TDI CR
- DPF off
- EGR off
- AdBlue (SCR) off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
- Start/stop off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 03L906012AA and software 527066
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 03L906012AA and software 527066 (1037527066), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2013 VW Passat 2.0 TDI CR (132 kW, 179 hp), for its Bosch EDC17 ECU with part number 03L906012AA and software 527066 (1037527066). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 2.0 TDI CR raises the injected fuel, the boost and the rail pressure and lifts the torque limiters, within what the standard turbo, injectors and clutch hold. The smoke limiter follows the new airflow, so a healthy engine pulls harder without black smoke.
The VW Passat 2.0 TDI CR carries the 2.0 TDI CR engine, 177 hp and 380 Nm from the factory. On this engine, Stage 1 usually gives about 215 hp and 430 Nm (+38 hp, +50 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 527066 of the VW Passat 2.0 TDI CR we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Bosch EDC17 ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius, Dimsport New Trasdata and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 2.0 TDI CR engine with the same ECU is fitted to the Volkswagen Passat CC, Volkswagen Scirocco III, Volkswagen Sharan II 7N and Volkswagen Tiguan I: their file can be the same, so check the software number of your read.
DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 527066 (1037527066) is the calibration inside the Bosch ECU. Part number 03L906012AA is the car maker's number for this ECU.
Questions
Which ECU does this VW Passat 2.0 TDI CR Stage 1 file fit?
A Bosch EDC17 ECU with part number 03L906012AA and software 527066 (1037527066). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC17 read and written?
Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Passat 2.0 TDI CR?
Usually about 215 hp and 430 Nm against 177 hp and 380 Nm stock (+38 hp, +50 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch EDC17 file?
Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand