Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Lupo I
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Lupo

Instant download

VW Lupo 1.4 16V Stage 1 file 036906034AQ

Petrol · 75 hp (55 kW)

Share WhatsApp Facebook

VW / Volkswagen Lupo I 1998–2005

Dyno sheet

Power
85 hp +10
Torque
140 Nm +14
Power and torque: Stock and Stage 1Power in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00255050100751501002001000200030004000500060007000hpNmrpm
Stock Stage 1 Power Torque

Typical crank figures for a healthy 1.4i 16v. Results depend on the car's condition, fuel and parts.

Power
75 hp 55 kW
Engine
1.4i 16v Petrol · 1,390 cc · 4 cyl
File
512 KB BIN, ready to write

The VW Lupo 1.4 16V file

ECU
MARELLI IAW4MV

Software and hardware

Part number
036906034AQ Volkswagen's part number for this ECU, printed 036 906 034 AQ

Check your read against this file

How the ECU is read: OBD

  • OBD

Older tools

  • KESS V2

Built on request for the VW Lupo 1.4 16V

  • Catalyst off
  • Speed limiter (Vmax) off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numberspart number 036906034AQ
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows part number 036906034AQ, the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD) you read the ECU with.

About this file

What this Stage 1 file is

This is a Stage 1 tune of the factory calibration of the VW Lupo 1.4 16V (55 kW, 75 hp), for its ECU with part number 036906034AQ. Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.

Stage 1 on the 1.4i 16v refines the ignition timing and the fuelling across the rev range; on an engine without a turbo the gain is modest, the throttle answers sooner.

The VW Lupo 1.4 16V carries the 1.4i 16v engine, 75 hp and 126 Nm from the factory. On this engine, Stage 1 usually gives about 85 hp and 140 Nm (+10 hp, +14 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For this calibration of the VW Lupo 1.4 16V we sell the original, Stage 1 and Stage 2. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.

The ECU in this car is read and written over OBD, with tools such as Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 1.4i 16v engine with the same ECU is fitted to the Audi A2 8Z: their file can be the same, so check the software number of your read.

Catalyst off and speed limiter (Vmax) off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Part number 036906034AQ is the car maker's number for this ECU.

Questions

Which ECU does this VW Lupo 1.4 16V Stage 1 file fit?

A ECU with part number 036906034AQ. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the ECU read and written?

Over OBD, with tools such as Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Lupo 1.4 16V?

Usually about 85 hp and 140 Nm against 75 hp and 126 Nm stock (+10 hp, +14 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the ECU file?

Yes, on request, for off-road and competition use: catalyst off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 512 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read