Instant download
VW Golf 2.0 TDI CR Stage 1 file Bosch EDC17C64 · 04L906021EP · SW 537361
2013 · Turbo diesel · 184 hp (135 kW)
Choose your file
Dyno sheet
- Power
- 220 hp +36
- Torque
- 440 Nm +60
Typical crank figures for a healthy 2.0 TDI (CR). Results depend on the car's condition, fuel and parts.
- Power
- 184 hp 135 kW
- ECU
- Bosch EDC17C64
- Engine
- 2.0 TDI (CR) Turbo diesel · 1,968 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Bosch EDC17C64 on the VW Golf 2.0 TDI CR
Software and hardware
- Part number
- 04L906021EP Volkswagen's part number for this ECU, printed 04L 906 021 EP
- Software
- 537361 (1037537361) The software inside: your read must show this number
How the Bosch EDC17C64 is read: OBD, Bench and Boot
Older tools
Built on request for the VW Golf 2.0 TDI CR
- DPF off
- EGR off
- AdBlue (SCR) off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
- Start/stop off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 04L906021EP and software 537361
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 04L906021EP and software 537361 (1037537361), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2013 VW Golf 2.0 TDI CR (135 kW, 184 hp), for its Bosch EDC17C64 ECU with part number 04L906021EP and software 537361 (1037537361). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 2.0 TDI (CR) raises the injected fuel, the boost and the rail pressure and lifts the torque limiters, within what the standard turbo, injectors and clutch hold. The smoke limiter follows the new airflow, so a healthy engine pulls harder without black smoke.
The VW Golf 2.0 TDI CR carries the 2.0 TDI (CR) engine, 184 hp and 380 Nm from the factory. On this engine, Stage 1 usually gives about 220 hp and 440 Nm (+36 hp, +60 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 537361 of the VW Golf 2.0 TDI CR we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.
The Bosch EDC17C64 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Autotuner, MagicMotorsport FLEX, CMD Flash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 2.0 TDI (CR) engine with the same ECU is fitted to the Audi A3 8V, Audi TT 8S, Seat Leon 5F.2, Volkswagen Scirocco III and Volkswagen Sharan II 7N: their file can be the same, so check the software number of your read.
DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Software 537361 (1037537361) is the calibration inside the Bosch ECU. Part number 04L906021EP is the car maker's number for this ECU.
Questions
Which ECU does this VW Golf 2.0 TDI CR Stage 1 file fit?
A Bosch EDC17C64 ECU with part number 04L906021EP and software 537361 (1037537361). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC17C64 read and written?
Over OBD and on the bench, with tools such as Alientech KESS3, Autotuner, MagicMotorsport FLEX, CMD Flash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Golf 2.0 TDI CR?
Usually about 220 hp and 440 Nm against 184 hp and 380 Nm stock (+36 hp, +60 Nm). Typical for a healthy engine, never a promise for one car.
Can you add DPF off and EGR off to the Bosch EDC17C64 file?
Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand