Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
Skoda Octavia II
  1. Home
  2. I need a file
  3. ECU files
  4. Skoda
  5. Skoda Octavia

Instant download

Skoda Octavia 2.0 TDI Stage 2 file Bosch HW 0281013160 · 03G906021JC · SW 382441

2005 · Turbo diesel · 140 hp (103 kW)

Share WhatsApp Facebook

Skoda Octavia II 2004–2013

Dyno sheet

Power
190 hp +50
Torque
410 Nm +90
Power and torque: Stock and Stage 2Power in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00751501503002254503006001000200030004000hpNmrpm
Stock Stage 2 Power Torque

Typical crank figures for a healthy 2.0 TDi (IP). Results depend on the car's condition, fuel and parts.

Power
140 hp 103 kW
ECU
Bosch
Engine
2.0 TDi (IP) Turbo diesel · 1,968 cc · 4 cyl
File
2 MB BIN, ready to write

Bosch on the Skoda Octavia 2.0 TDI

Software and hardware

Hardware
0281013160 Bosch's number for the ECU itself, on its label printed 0 281 013 160
Part number
03G906021JC Skoda's part number for this ECU, printed 03G 906 021 JC
Software
382441 (1037382441) The software inside: your read must show this number

Check your read against this file

How the Bosch is read: OBD and Bench

  • OBD
  • Bench
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius

Older tools

  • KESS V2

Built on request for the Skoda Octavia 2.0 TDI

  • DPF off
  • EGR off
  • DTC off
  • Speed limiter (Vmax) off
  • Swirl flaps off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0281013160, part number 03G906021JC and software 382441
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0281013160, part number 03G906021JC and software 382441 (1037382441), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this Stage 2 file is

This is a Stage 2 tune of the factory calibration of the 2005 Skoda Octavia 2.0 TDI (103 kW, 140 hp), for its Bosch ECU with hardware 0281013160, part number 03G906021JC and software 382441 (1037382441). Stage 2 is written for a car with supporting parts fitted; if yours differ from the usual build, we match the file to them.

Stage 2 on the 2.0 TDi (IP) goes further than Stage 1 and expects supporting parts: a freer exhaust or downpipe, a bigger intercooler and a clutch rated for the torque. Fit them first; on a standard car a Stage 2 file asks more than the parts give.

The Skoda Octavia 2.0 TDI carries the 2.0 TDi (IP) engine, 140 hp and 320 Nm from the factory. On this engine, Stage 1 usually gives about 180 hp and 400 Nm (+40 hp, +80 Nm); Stage 2 usually gives about 190 hp and 410 Nm (+50 hp, +90 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 382441 of the Skoda Octavia 2.0 TDI we sell the original, Stage 1 and Stage 2, each made from the same original read. Every file downloads straight after payment.

The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 2.0 TDi (IP) engine with the same ECU is fitted to the Audi A3 8P: their file can be the same, so check the software number of your read.

DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0281013160 is the number on the Bosch ECU's label. Software 382441 (1037382441) is the calibration inside it: a read with hardware 0281013160 and another software number needs a different file. Part number 03G906021JC is the car maker's number for this ECU.

Questions

Which ECU does this Skoda Octavia 2.0 TDI Stage 2 file fit?

A Bosch ECU with hardware 0281013160, part number 03G906021JC and software 382441 (1037382441). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch ECU read and written?

Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the Skoda Octavia 2.0 TDI?

Usually about 180 hp and 400 Nm against 140 hp and 320 Nm stock (+40 hp, +80 Nm). Typical for a healthy engine, never a promise for one car.

Can you add DPF off and EGR off to the Bosch ECU file?

Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

Stage 1 or Stage 2 on the Skoda Octavia 2.0 TDI?

Stage 1, about 180 hp and 400 Nm, is for a standard car. Stage 2, about 190 hp and 410 Nm, is written for a car with supporting parts: a freer exhaust, a bigger intercooler and a clutch that holds the torque, as this engine needs.

What exactly is in the download?

A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

Does software 382441 fit other cars?

We also sell this software for the Seat Althea 2.0 TDI and VW Passat 2.0 TDI. The hardware number on your ECU decides whether the same file fits: match it before you write.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read