Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
Audi A6 C7
  1. Home
  2. I need a file
  3. ECU files
  4. Audi
  5. Audi A6

Instant download

Audi A6 3.0 TDI CR Stage 1 file Bosch EDC17 · 4G0907589C · SW 528336

2013 · Turbo diesel · 313 hp (230 kW)

Share WhatsApp Facebook

Audi A6 C7 2011–2018

Dyno sheet

Power
355 hp +42
Torque
720 Nm +70
Power and torque: Stock and Stage 1Power in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.0010030020060030090040012001000200030004000hpNmrpm
Stock Stage 1 Power Torque

Typical crank figures for a healthy 3.0 BiTDI. Results depend on the car's condition, fuel and parts.

Power
313 hp 230 kW
ECU
Bosch EDC17
Engine
3.0 BiTDI Turbo diesel · 2,967 cc · 6 cyl
File
2 MB BIN, ready to write

Bosch EDC17 on the Audi A6 3.0 TDI CR

Software and hardware

Part number
4G0907589C Audi's part number for this ECU, printed 4G0 907 589 C
Software
528336 (1037528336) The software inside: your read must show this number

Check your read against this file

How the Bosch EDC17 is read: OBD, Bench and Boot

  • OBD
  • Bench
  • Boot
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • PCMflash
  • Byteshooter
  • Bitbox
  • DFOX
  • Cummins Diagnostics
  • Caterpillar/Perkins Diagnostics

Older tools

  • KESS V2
  • Trasdata
  • MAGPro2

Built on request for the Audi A6 3.0 TDI CR

  • DPF off
  • EGR off
  • AdBlue (SCR) off
  • DTC off
  • Speed limiter (Vmax) off
  • Swirl flaps off
  • Start/stop off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numberspart number 4G0907589C and software 528336
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows part number 4G0907589C and software 528336 (1037528336), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this Stage 1 file is

This is a Stage 1 tune of the factory calibration of the 2013 Audi A6 3.0 TDI CR (230 kW, 313 hp), for its Bosch EDC17 ECU with part number 4G0907589C and software 528336 (1037528336). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.

Stage 1 on the 3.0 BiTDI raises the injected fuel, the boost and the rail pressure and lifts the torque limiters, within what the standard turbo, injectors and clutch hold. The smoke limiter follows the new airflow, so a healthy engine pulls harder without black smoke.

The Audi A6 3.0 TDI CR carries the 3.0 BiTDI engine, 313 hp and 650 Nm from the factory. On this engine, Stage 1 usually gives about 355 hp and 720 Nm (+42 hp, +70 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 528336 of the Audi A6 3.0 TDI CR we sell the original, Stage 1 and Stage 3. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.

The Bosch EDC17 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, Autotuner, MagicMotorsport FLEX, CMD Flash and Dimsport NewGenius. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 3.0 BiTDI engine with the same ECU is fitted to the Audi A7 C7, Audi Q5 8R, Audi Q5 8R FL and Audi SQ5: their file can be the same, so check the software number of your read.

DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Software 528336 (1037528336) is the calibration inside the Bosch ECU. Part number 4G0907589C is the car maker's number for this ECU.

Questions

Which ECU does this Audi A6 3.0 TDI CR Stage 1 file fit?

A Bosch EDC17 ECU with part number 4G0907589C and software 528336 (1037528336). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch EDC17 read and written?

Over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, Autotuner, MagicMotorsport FLEX and CMD Flash. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the Audi A6 3.0 TDI CR?

Usually about 355 hp and 720 Nm against 313 hp and 650 Nm stock (+42 hp, +70 Nm). Typical for a healthy engine, never a promise for one car.

Can you add DPF off and EGR off to the Bosch EDC17 file?

Yes, on request, for off-road and competition use: DPF off, EGR off, AdBlue (SCR) off, DTC off, speed limiter (Vmax) off, swirl flaps off and start/stop off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

Does software 528336 fit other cars?

We also sell this software for the Alfa A6 3.0 TDI CR. The hardware number on your ECU decides whether the same file fits: match it before you write.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read