Instant download
VW Touareg 5.0 TDI PD original file Bosch EDC16U HW 0281010736 · 070906016D · SW 367461
2003 · Turbo diesel · 313 hp (230 kW)
Choose your file
Dyno sheet
- Power
- 313 hp
- Torque
- 750 Nm
Typical crank figures for a healthy 5.0 TDI V10. Results depend on the car's condition, fuel and parts.
- Power
- 313 hp 230 kW
- ECU
- Bosch EDC16U
- Engine
- 5.0 TDI V10 Turbo diesel · 4,921 cc · 10 cyl
- File
- 1 MB BIN, ready to write
Bosch EDC16U on the VW Touareg 5.0 TDI PD
Software and hardware
- Hardware
- 0281010736 Bosch's number for the ECU itself, on its label printed 0 281 010 736
- Part number
- 070906016D Volkswagen's part number for this ECU, printed 070 906 016 D
- Software
- 367461 (1037367461) The software inside: your read must show this number
How the Bosch EDC16U is read: OBD and Bench
Older tools
Built on request for the VW Touareg 5.0 TDI PD
- EGR off
- DTC off
- Speed limiter (Vmax) off
- Swirl flaps off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0281010736, part number 070906016D and software 367461
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0281010736, part number 070906016D and software 367461 (1037367461), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2003 VW Touareg 5.0 TDI PD (230 kW, 313 hp), for its Bosch EDC16U ECU with hardware 0281010736, part number 070906016D and software 367461 (1037367461). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The VW Touareg 5.0 TDI PD carries the 5.0 TDI V10 engine, 313 hp and 750 Nm from the factory. On this engine, Stage 1 usually gives about 375 hp and 820 Nm (+62 hp, +70 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 367461 of the VW Touareg 5.0 TDI PD we sell the original and Stage 1. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The Bosch EDC16U ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, CMD Flash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0281010736 is the number on the Bosch ECU's label. Software 367461 (1037367461) is the calibration inside it: a read with hardware 0281010736 and another software number needs a different file. Part number 070906016D is the car maker's number for this ECU.
Questions
Which ECU does this VW Touareg 5.0 TDI PD original file fit?
A Bosch EDC16U ECU with hardware 0281010736, part number 070906016D and software 367461 (1037367461). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch EDC16U read and written?
Over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, CMD Flash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Touareg 5.0 TDI PD?
Usually about 375 hp and 820 Nm against 313 hp and 750 Nm stock (+62 hp, +70 Nm). Typical for a healthy engine, never a promise for one car.
Can you add EGR off to the Bosch EDC16U file?
Yes, on request, for off-road and competition use: EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 1 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand