Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Lupo I
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Lupo

Instant download

VW Lupo 1.7SDI original file Bosch EDC15 HW 0281010179 · 038906012BE

Diesel · 60 hp (44 kW)

Share WhatsApp Facebook

VW / Volkswagen Lupo I 1998–2005

Dyno sheet

Power
60 hp
Torque
115 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00255050100751501002001000200030004000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 1.7 SDI. Results depend on the car's condition, fuel and parts.

Power
60 hp 44 kW
ECU
Bosch EDC15
Engine
1.7 SDI Turbo diesel · 1,716 cc · 4 cyl
File
512 KB BIN, ready to write

Bosch EDC15 on the VW Lupo 1.7SDI

Software and hardware

Hardware
0281010179 Bosch's number for the ECU itself, on its label printed 0 281 010 179
Part number
038906012BE Volkswagen's part number for this ECU, printed 038 906 012 BE

Check your read against this file

How the Bosch EDC15 is read: OBD and Bench

  • OBD
  • Bench
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • Bitbox

Older tools

  • KESS V2
  • MPPS

Built on request for the VW Lupo 1.7SDI

  • EGR off
  • DTC off
  • Speed limiter (Vmax) off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0281010179 and part number 038906012BE
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0281010179 and part number 038906012BE, the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the VW Lupo 1.7SDI (44 kW, 60 hp), for its Bosch EDC15 ECU with hardware 0281010179 and part number 038906012BE. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Lupo 1.7SDI carries the 1.7 SDI engine, 60 hp and 115 Nm from the factory. On this engine, Stage 1 usually gives about 75 hp and 130 Nm (+15 hp, +15 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For this calibration of the VW Lupo 1.7SDI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Bosch EDC15 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, Autotuner, MagicMotorsport FLEX, CMD Flash and Dimsport New Genius. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

EGR off, DTC off and speed limiter (Vmax) off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0281010179 is the number on the Bosch ECU's label. Part number 038906012BE is the car maker's number for this ECU.

Questions

Which ECU does this VW Lupo 1.7SDI original file fit?

A Bosch EDC15 ECU with hardware 0281010179 and part number 038906012BE. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch EDC15 read and written?

Over OBD and on the bench, with tools such as Alientech KESS3, Alientech K-Tag, Autotuner, MagicMotorsport FLEX and CMD Flash. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Lupo 1.7SDI?

Usually about 75 hp and 130 Nm against 60 hp and 115 Nm stock (+15 hp, +15 Nm). Typical for a healthy engine, never a promise for one car.

Can you add EGR off to the Bosch EDC15 file?

Yes, on request, for off-road and competition use: EGR off, DTC off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 512 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read