Instant download
VW Lupo 1.4 16V original file 036906034AQ
2002 · Petrol · 75 hp (55 kW)
Choose your file
Dyno sheet
- Power
- 75 hp
- Torque
- 126 Nm
Typical crank figures for a healthy 1.4i 16v. Results depend on the car's condition, fuel and parts.
- Power
- 75 hp 55 kW
- Engine
- 1.4i 16v Petrol · 1,390 cc · 4 cyl
- File
- 512 KB BIN, ready to write
The VW Lupo 1.4 16V file
- ECU
- MARELLI IAW4MV
Software and hardware
- Part number
- 036906034AQ Volkswagen's part number for this ECU, printed 036 906 034 AQ
How the ECU is read: OBD
Older tools
Built on request for the VW Lupo 1.4 16V
- Catalyst off
- Speed limiter (Vmax) off
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numberspart number 036906034AQ
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows part number 036906034AQ, the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2002 VW Lupo 1.4 16V (55 kW, 75 hp), for its ECU with part number 036906034AQ. Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The VW Lupo 1.4 16V carries the 1.4i 16v engine, 75 hp and 126 Nm from the factory. On this engine, Stage 1 usually gives about 85 hp and 140 Nm (+10 hp, +14 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For this calibration of the VW Lupo 1.4 16V we sell the original, Stage 1 and Stage 2. Stage 1 comes in two versions, tuned from different reads of this software. Every file downloads straight after payment.
The ECU in this car is read and written over OBD, with tools such as Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 1.4i 16v engine with the same ECU is fitted to the Audi A2 8Z: their file can be the same, so check the software number of your read.
Catalyst off and speed limiter (Vmax) off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Part number 036906034AQ is the car maker's number for this ECU.
Questions
Which ECU does this VW Lupo 1.4 16V original file fit?
A ECU with part number 036906034AQ. Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the ECU read and written?
Over OBD, with tools such as Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the VW Lupo 1.4 16V?
Usually about 85 hp and 140 Nm against 75 hp and 126 Nm stock (+10 hp, +14 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the ECU file?
Yes, on request, for off-road and competition use: catalyst off and speed limiter (Vmax) off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 512 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand