Instant download
VW Golf 6 GTI 2.0 TFSI original file Bosch MED17 HW 0261S04951 · 1K0907115AA · SW 501817
2010 · Turbo petrol · 211 hp (155 kW)
Choose your file
Dyno sheet
- Power
- 210 hp
- Torque
- 280 Nm
Typical crank figures for a healthy 2.0 TSI GTI. Results depend on the car's condition, fuel and parts.
- Power
- 211 hp 155 kW
- ECU
- Bosch MED17
- Engine
- 2.0 TSI GTI Turbo petrol · 1,984 cc · 4 cyl
- File
- 1.47 MB BIN, ready to write
Bosch MED17 on the VW Golf 6 GTI 2.0 TFSI
Software and hardware
- Hardware
- 0261S04951 Bosch's number for the ECU itself, on its label printed 0 261 S04 951
- Part number
- 1K0907115AA Volkswagen's part number for this ECU, printed 1K0 907 115 AA
- Software
- 501817 (1037501817) The software inside: your read must show this number
How the Bosch MED17 is read: OBD, Bench and Boot
Older tools
Built on request for the VW Golf 6 GTI 2.0 TFSI
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Start/stop off
- Pops and bangs
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261S04951, part number 1K0907115AA and software 501817
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261S04951, part number 1K0907115AA and software 501817 (1037501817), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this original file is
This is the factory calibration of the 2010 VW Golf 6 GTI 2.0 TFSI (155 kW, 211 hp), for its Bosch MED17 ECU with hardware 0261S04951, part number 1K0907115AA and software 501817 (1037501817). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.
An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.
The VW Golf 6 GTI 2.0 TFSI carries the 2.0 TSI GTI engine, 210 hp and 280 Nm from the factory.
This file of software 501817 of the VW Golf 6 GTI 2.0 TFSI downloads straight after payment. Another stage of it can be built from your own read by our engineers.
The Bosch MED17 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
The same 2.0 TSI GTI engine with the same ECU is fitted to the Volkswagen Eos and Volkswagen Passat CC: their file can be the same, so check the software number of your read.
Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261S04951 is the number on the Bosch ECU's label. Software 501817 (1037501817) is the calibration inside it: a read with hardware 0261S04951 and another software number needs a different file. Part number 1K0907115AA is the car maker's number for this ECU.
Questions
Which ECU does this VW Golf 6 GTI 2.0 TFSI original file fit?
A Bosch MED17 ECU with hardware 0261S04951, part number 1K0907115AA and software 501817 (1037501817). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch MED17 read and written?
Over OBD and on the bench, with tools such as Alientech KESS3, Autotuner, MagicMotorsport FLEX, CMD Flash and Dimsport New Genius. Write the file back the same way you read the ECU, and keep your original read.
Can you add catalyst off to the Bosch MED17 file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
What exactly is in the download?
A BIN file of 1.47 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand