Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Golf V
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Golf

Instant download

VW Golf 5 1.9 TDI original file Bosch HW 0281011955 · 03G906016FS · SW 370811

2004 · Turbo diesel · 90 hp (66 kW)

Share WhatsApp Facebook

VW / Volkswagen Golf V 2003–2009

Dyno sheet

Power
90 hp
Torque
210 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.00501001002001503002004001000200030004000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 1.9 TDI. Results depend on the car's condition, fuel and parts.

Power
90 hp 66 kW
ECU
Bosch
Engine
1.9 TDI Turbo diesel · 1,896 cc · 4 cyl
File
1 MB BIN, ready to write

Bosch on the VW Golf 5 1.9 TDI

Software and hardware

Hardware
0281011955 Bosch's number for the ECU itself, on its label printed 0 281 011 955
Part number
03G906016FS Volkswagen's part number for this ECU, printed 03G 906 016 FS
Software
370811 (1037370811) The software inside: your read must show this number

Check your read against this file

How the Bosch is read: OBD and Bench

  • OBD
  • Bench
  • Autotuner
  • FLEX
  • CMD Flash
  • bFlash

Older tools

  • KESS V2

Built on request for the VW Golf 5 1.9 TDI

  • DPF off
  • EGR off
  • DTC off
  • Speed limiter (Vmax) off
  • Swirl flaps off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0281011955, part number 03G906016FS and software 370811
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0281011955, part number 03G906016FS and software 370811 (1037370811), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2004 VW Golf 5 1.9 TDI (66 kW, 90 hp), for its Bosch ECU with hardware 0281011955, part number 03G906016FS and software 370811 (1037370811). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: injection quantity and timing, boost and rail pressure, the torque and smoke limiters, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Golf 5 1.9 TDI carries the 1.9 TDI engine, 90 hp and 210 Nm from the factory. On this engine, Stage 1 usually gives about 140 hp and 320 Nm (+50 hp, +110 Nm); Stage 2 usually gives about 150 hp and 330 Nm (+60 hp, +120 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 370811 of the VW Golf 5 1.9 TDI we sell the original, Stage 1 and Stage 2. Stage 1 and Stage 2 each come in two versions, tuned from different reads of this software. Every file downloads straight after payment.

The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, bFlash and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 1.9 TDI engine with the same ECU is fitted to the Seat Leon 1P and Volkswagen Touran I: their file can be the same, so check the software number of your read.

DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0281011955 is the number on the Bosch ECU's label. Software 370811 (1037370811) is the calibration inside it: a read with hardware 0281011955 and another software number needs a different file. Part number 03G906016FS is the car maker's number for this ECU.

Questions

Which ECU does this VW Golf 5 1.9 TDI original file fit?

A Bosch ECU with hardware 0281011955, part number 03G906016FS and software 370811 (1037370811). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch ECU read and written?

Over OBD and on the bench, with tools such as Autotuner, MagicMotorsport FLEX, CMD Flash, bFlash and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Golf 5 1.9 TDI?

Usually about 140 hp and 320 Nm against 90 hp and 210 Nm stock (+50 hp, +110 Nm). Typical for a healthy engine, never a promise for one car.

Can you add DPF off and EGR off to the Bosch ECU file?

Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

Stage 1 or Stage 2 on the VW Golf 5 1.9 TDI?

Stage 1, about 140 hp and 320 Nm, is for a standard car. Stage 2, about 150 hp and 330 Nm, is written for a car with supporting parts: a freer exhaust, a bigger intercooler and a clutch that holds the torque, as this engine needs.

What exactly is in the download?

A BIN file of 1 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read