Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
VW / Volkswagen Golf VI
  1. Home
  2. I need a file
  3. ECU files
  4. Volkswagen
  5. Volkswagen Golf

Instant download

VW Golf6 1.4 TSI original file Bosch MED17.5.20 HW 0261201788 · 03C906022J · SW 393741

2009 · Turbo petrol · 122 hp (90 kW)

Share WhatsApp Facebook

VW / Volkswagen Golf VI 2008–2014

Dyno sheet

Power
122 hp
Torque
200 Nm
Power and torque: StockPower in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.005075100150150225200300200030004000500060007000hpNmrpm
Stock Stock Power Torque

Typical crank figures for a healthy 1.4 TSI. Results depend on the car's condition, fuel and parts.

Power
122 hp 90 kW
ECU
Bosch MED17.5.20
Engine
1.4 TSI Turbo petrol · 1,390 cc · 4 cyl
File
256 KB BIN, ready to write

Bosch MED17.5.20 on the VW Golf6 1.4 TSI

Software and hardware

Hardware
0261201788 Bosch's number for the ECU itself, on its label printed 0 261 201 788
Part number
03C906022J Volkswagen's part number for this ECU, printed 03C 906 022 J
Software
393741 (1037393741) The software inside: your read must show this number

Check your read against this file

How the Bosch MED17.5.20 is read: OBD, Bench and Boot

  • OBD
  • Bench
  • Boot
  • KESS3
  • K-TAG
  • Autotuner
  • FLEX
  • CMD Flash
  • New Genius
  • New Trasdata
  • bFlash
  • PCMflash
  • Byteshooter

Older tools

  • KESS V2
  • Trasdata
  • MAGPro2

Built on request for the VW Golf6 1.4 TSI

  • Catalyst off
  • DTC off
  • Speed limiter (Vmax) off
  • Start/stop off
  • Pops and bangs

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0261201788, part number 03C906022J and software 393741
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0261201788, part number 03C906022J and software 393741 (1037393741), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection (OBD and bench) you read the ECU with.

About this file

What this original file is

This is the factory calibration of the 2009 VW Golf6 1.4 TSI (90 kW, 122 hp), for its Bosch MED17.5.20 ECU with hardware 0261201788, part number 03C906022J and software 393741 (1037393741). Use it to put the car back to standard, to recover the ECU after a failed write, or as the base of a tune of your own.

An original holds every map as the factory wrote them: ignition, fuelling, boost and the torque limits, the speed limiter and the emissions controls. Tuners start a file from it; workshops use it to put a car back to standard.

The VW Golf6 1.4 TSI carries the 1.4 TSI engine, 122 hp and 200 Nm from the factory. On this engine, Stage 1 usually gives about 145 hp and 248 Nm (+23 hp, +48 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 393741 of the VW Golf6 1.4 TSI we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

The Bosch MED17.5.20 ECU in this car is read and written over OBD and on the bench, with tools such as Alientech KESS3, Autotuner, MagicMotorsport FLEX, CMD Flash, Dimsport New Genius and Dimsport New Trasdata. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.

The same 1.4 TSI engine with the same ECU is fitted to the Audi A1 8X, Audi A3 8P FL, Skoda Octavia II, Volkswagen Eos, Volkswagen Golf V, Volkswagen Jetta V, Volkswagen Jetta VI and Volkswagen Sagitar II: their file can be the same, so check the software number of your read.

Catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs can be built on this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0261201788 is the number on the Bosch ECU's label. Software 393741 (1037393741) is the calibration inside it: a read with hardware 0261201788 and another software number needs a different file. Part number 03C906022J is the car maker's number for this ECU.

Questions

Which ECU does this VW Golf6 1.4 TSI original file fit?

A Bosch MED17.5.20 ECU with hardware 0261201788, part number 03C906022J and software 393741 (1037393741). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch MED17.5.20 read and written?

Over OBD and on the bench, with tools such as Alientech KESS3, Autotuner, MagicMotorsport FLEX, CMD Flash and Dimsport New Genius. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the VW Golf6 1.4 TSI?

Usually about 145 hp and 248 Nm against 122 hp and 200 Nm stock (+23 hp, +48 Nm). Typical for a healthy engine, never a promise for one car.

Can you add catalyst off to the Bosch MED17.5.20 file?

Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, start/stop off and pops and bangs. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 256 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read