Stage 1
Stage 1 · Diesel · 13 480hp Euro4
Volvo FH13 480 Stage 1 file TRW
Volvo FH13 480 Turbo Diesel 353 kW (480 HP) TRW Stage 12007, Turbo diesel, 353 kW (480 hp)
480 → 550 HP +70 HP +375 Nm 15% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 13 480hp Euro4, Diesel. Engine #18539 in our gains database.
- Power
- 550 HP+70 HP from 480
- Torque
- 2775 Nm+375 Nm from 2400
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
The numbers in your read must be the ones listed on this page.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volvo |
|---|---|
| Vehicle model | Fh13 480 |
| Model year | 2007 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 353 kW (480 HP) |
| Calibration stage | Stage 1 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 480 HP | 2400 Nm | — | — |
| Stage 1 | 550 HP | 2775 Nm | +70 (14.6%) | +375 |
| Stage 2 | 682 HP | 3528 Nm | +202 (42.1%) | +1128 |
| Stage 3 | 720 HP | 3720 Nm | +240 (50%) | +1320 |
| Stage 4 | 864 HP | 4440 Nm | +384 (80%) | +2040 |
About this calibration file
The Stage 1 calibration for the 2007 Volvo Fh13 480 Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a OEM ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 550 HP and 2775 Nm at the crank — a gain of +70 HP (15%) and +375 Nm over the factory 480 HP / 2400 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for Volvo FH13 480 2007 Turbodiesel 353KW with TRW . The base stock vehicle for this calibration has a factory output of around 353 kW (~480 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number the ECU part number in the product title.Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
B808E402 288E9B59 48B3C6D4 CE73BE8A E346234E 3E52386E 9E1B30F4 E510CAB5