Instant download
Audi A3 1.8T FSI Stage 1 file Bosch HW 0261201598 · 8P1907115B · SW 387463
2002 · Turbo petrol · 180 hp (132 kW)
Choose your file
Dyno sheet
- Power
- 210 hp +30
- Torque
- 340 Nm +105
Typical crank figures for a healthy 1.8T. Results depend on the car's condition, fuel and parts.
- Power
- 180 hp 132 kW
- ECU
- Bosch
- Engine
- 1.8T Turbo petrol · 1,781 cc · 4 cyl
- File
- 2 MB BIN, ready to write
Bosch on the Audi A3 1.8T FSI
Software and hardware
- Hardware
- 0261201598 Bosch's number for the ECU itself, on its label printed 0 261 201 598
- Part number
- 8P1907115B Audi's part number for this ECU, printed 8P1 907 115 B
- Software
- 387463 (1037387463) The software inside: your read must show this number
How the Bosch is read: OBD and Bench
Older tools
Built on request for the Audi A3 1.8T FSI
- Catalyst off
- DTC off
- Speed limiter (Vmax) off
- Pops and bangs
- Anti-lag
Request a custom solution Any file £50, from £30 in packs, every option in the one price.
Not the one? Find another
By the numbers in your tool, or by the car.
Or search this file's own
Is this the file for your read?
Drop your read and we compare it with this file, number by number. It stays private.
- Read the file on your computer
- Look for it in our files
- Upload it, kept private
- Compare it with this file
From read to write
- Read the ECUKeep the read: it is your way back.
- Match the numbershardware 0261201598, part number 8P1907115B and software 387463
- Pay and downloadThe file is in your account straight away.
- Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
- A battery charger on the car: a write takes minutes and the voltage must not drop.
- Your own read saved twice, on two different drives: it is your way back.
- Your read shows hardware 0261201598, part number 8P1907115B and software 387463 (1037387463), the same as this file.
- Fault codes read and noted before the write, and cleared after it.
- The same tool and connection (OBD and bench) you read the ECU with.
About this file
What this Stage 1 file is
This is a Stage 1 tune of the factory calibration of the 2002 Audi A3 1.8T FSI (132 kW, 180 hp), for its Bosch ECU with hardware 0261201598, part number 8P1907115B and software 387463 (1037387463). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.
Stage 1 on the 1.8T raises the boost, sets the ignition and the fuelling to match and lifts the torque limits, within what the standard turbo and fuel pump hold. It wants the fuel octane the car was made for, or better.
The Audi A3 1.8T FSI carries the 1.8T engine, 180 hp and 235 Nm from the factory. On this engine, Stage 1 usually gives about 210 hp and 340 Nm (+30 hp, +105 Nm); Stage 2 usually gives about 220 hp and 350 Nm (+40 hp, +115 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.
For software 387463 of the Audi A3 1.8T FSI we sell the original, Stage 1 and Stage 2, each made from the same original read. Every file downloads straight after payment.
The Bosch ECU in this car is read and written over OBD and on the bench, with tools such as CMD Flash, Dimsport New Genius and Alientech Kess V2. Keep your own read: compare its hardware and software numbers with the ones on this page before you write the file.
Catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).
Hardware 0261201598 is the number on the Bosch ECU's label. Software 387463 (1037387463) is the calibration inside it: a read with hardware 0261201598 and another software number needs a different file. Part number 8P1907115B is the car maker's number for this ECU.
Questions
Which ECU does this Audi A3 1.8T FSI Stage 1 file fit?
A Bosch ECU with hardware 0261201598, part number 8P1907115B and software 387463 (1037387463). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.
How is the Bosch ECU read and written?
Over OBD and on the bench, with tools such as CMD Flash, Dimsport New Genius and Alientech Kess V2. Write the file back the same way you read the ECU, and keep your original read.
What does Stage 1 give on the Audi A3 1.8T FSI?
Usually about 210 hp and 340 Nm against 180 hp and 235 Nm stock (+30 hp, +105 Nm). Typical for a healthy engine, never a promise for one car.
Can you add catalyst off to the Bosch ECU file?
Yes, on request, for off-road and competition use: catalyst off, DTC off, speed limiter (Vmax) off, pops and bangs and anti-lag. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.
Stage 1 or Stage 2 on the Audi A3 1.8T FSI?
Stage 1, about 210 hp and 340 Nm, is for a standard car. Stage 2, about 220 hp and 350 Nm, is written for a car with supporting parts: a freer exhaust, a bigger intercooler and a clutch that holds the torque, as this engine needs.
What exactly is in the download?
A BIN file of 2 MB, ready to write. Write it with the same tool and the same connection you read the ECU with.
How do I get the file after paying?
It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.
What if the file does not fit my car?
Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.
I need a file
A file for the car in front of you
Our engineers tune your read, or the file is already in the library.
- I run a tuning businessYour own file portal
- PartnersA file service behind your brand