Stage 1
Stage 1 · Diesel · 2.0 TDI CR 136hp
Audi A3 2.0 TDI CR Stage 1 file Bosch · 03L906018JL · SW 521653
Audi A3 2.0 TDI CR Turbo Diesel 100 kW (136 HP) Stage 12012, Turbo diesel, 100 kW (136 hp)
136 → 190 HP +54 HP +100 Nm 40% more power
Calibrated ECU file for 03L906018JL (SW 521653). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 TDI CR 136hp, CFF, 2L, Diesel. Engine #242 in our gains database.
- Power
- 190 HP+54 HP from 136
- Torque
- 420 Nm+100 Nm from 320
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 03L906018JL and software 521653.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A3 |
| Model year | 2012 |
| Displacement | 2.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 100 kW (136 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 03L906018JL |
| ECU software | 521653 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 1968 CC |
| Compression ratio | 16,5 : 1 |
| Bore × Stroke | 81,0 X 95,5 mm |
| OEM engine code | CFF |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 136 HP | 320 Nm | — | — |
| Stage 1 | 190 HP | 420 Nm | +54 (39.7%) | +100 |
| Stage 2 | 200 HP | 437 Nm | +64 (47.1%) | +117 |
| Stage 3 | 220 HP | 450 Nm | +84 (61.8%) | +130 |
| Stage 4 | 245 HP | 592 Nm | +109 (80.1%) | +272 |
About this calibration file
The Stage 1 calibration for the 2012 Audi A3 2.0L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 03L906018JL and software version 521653. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 190 HP and 420 Nm at the crank — a gain of +54 HP (40%) and +100 Nm over the factory 136 HP / 320 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
03L906018JL (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Audi A3 2.0 TDI CR 2012 Turbo-Diesel 100KW with Bosch 03L906018JL (Bosch software number 521653 ( 1037521653 )). The base stock vehicle for this calibration has a factory output of around 100 kW (~136 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 03L906018JL, 521653 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
FECF6AC9 4DBA3566 7833A36C 6F7DC83E 86FF3F81 C7A57067 D39DC149 30869125