Original file
Original / Factory · Petrol · 1.6i 102hp
Audi A4 1.6 L original file Bosch HW 0261203941 · 8D0907557HX · SW 358701
Audi A4 1.6 L Petrol 74.3 kW (101 HP) OriginalPetrol, 74.3 kW (101 hp)
102 HP Factory calibration Stock backup file, 148 Nm, Petrol
Calibrated ECU file for 0261203941 (SW 358701). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 1.6i 102hp, ALZ, 1.6L, Petrol. Engine #290 in our gains database.
- Power
- 102 HPfactory calibration
- Torque
- 148 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261203941 and software 358701.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A4 |
| Displacement | 1.6 L |
| Fuel / Induction | Petrol |
| Factory power | 74.3 kW (101 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 8D0907557HX |
| ECU hardware | 0261203941 |
| ECU software | 358701 |
| Calibration stage | Original (Factory) |
| OEM engine code | ALZ |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 102 HP | 148 Nm | — | — |
| Stage 1 | 112 HP | 163 Nm | +10 (9.8%) | +15 |
| Stage 2 | 119 HP | 171 Nm | +17 (16.7%) | +23 |
| Stage 3 | 168 HP | 229 Nm | +66 (64.7%) | +81 |
| Stage 4 | 199 HP | 274 Nm | +97 (95.1%) | +126 |
About this calibration file
This is the factory (original) ECU calibration for the Audi A4 1.6L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261203941 and software version 358701. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261203941 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi A4 1.6 L Benzin 74.3KW with Bosch 0261203941 and software ID 8D0907557HX (Bosch software number 358701 ( 1037358701 )). This original file corresponds to a factory engine output of approximately 74.3 kW (~101 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261203941, 8D0907557HX, 358701 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
C6A0A0E6 67487DBA 98C63904 924E9342 0F523549 B59FF5F5 D9B9934F CB692E30