Original file
Original / Factory · Petrol · 2.0 T 160hp
Volvo V40 LPT original file Siemens
Volvo V40 LPT Turbo Petrol 117.7 kW (160 HP) OriginalTurbo petrol, 117.7 kW (160 hp)
160 HP Factory calibration Stock backup file, 230 Nm, Petrol
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.0 T 160hp, B4204T2, 1.9L, Petrol. Engine #8290 in our gains database.
- Power
- 160 HPfactory calibration
- Torque
- 230 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware V411043000000.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volvo |
|---|---|
| Vehicle model | V40 Lpt |
| Fuel / Induction | Petrol |
| Factory power | 117.7 kW (160 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | V411043000000 |
| Calibration stage | Original (Factory) |
| OEM engine code | B4204T2 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 160 HP | 230 Nm | — | — |
| Stage 1 | 195 HP | 290 Nm | +35 (21.9%) | +60 |
| Stage 2 | 207 HP | 305 Nm | +47 (29.4%) | +75 |
| Stage 3 | 264 HP | 357 Nm | +104 (65%) | +127 |
| Stage 4 | 312 HP | 426 Nm | +152 (95%) | +196 |
About this calibration file
This is the factory (original) ECU calibration for the Volvo V40 Lpt Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number V411043000000. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
V411043000000 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Volvo V40 LPT Turbo-Benzin 117.7KW with Siemens V411043000000. This original file corresponds to a factory engine output of approximately 117.7 kW (~160 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as V411043000000. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
D3D1D0E5 8B645671 1B0F9898 2F6A5D82 D2AC90EB 6C8D9B44 17A18EFB 07A44A2B