Audi A6 2.5 TDI Turbo Diesel 85.3 kW (116 HP) Original
Calibrated ECU file for . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A6 |
| Model year | 1996 |
| Displacement | 2.5 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 85.3 kW (116 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281001254 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1896 CC |
| Compression ratio | 19,5 : 1 |
| Bore × Stroke | 79,5 X 95,5 mm |
| OEM engine code | AJM |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 115 HP | 310 Nm | — | — |
| Stage 1 | 145 HP | 360 Nm | +30 (26.1%) | +50 |
About this calibration file
This is the factory (original) ECU calibration for the 1996 Audi A6 2.5L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281001254. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281001254 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product Details
This product contains a complete original ECU backup (stock file) for Audi A6 2.5 TDI 1996 Turbodiesel 85.3KW with Bosch 0281001254 and software ID 4A0907401E (Bosch software number 358854 ( 1037358854 )). This original file corresponds to a factory engine output of approximately 85.3 kW (~116 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281001254, 4A0907401E, 358854 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
B27D66A7 0DE63B36 4FD6FF87 59896420 6A96A149 D10B0FB0 622FBB9F 72589730Same engine — other calibrations
Alternative stages for the same ECU: Audi family
