Stage 2
Stage 2 · Petrol · 2.4i V6 170hp
Audi A6 2.8E V6 Stage 2 file Bosch · 4A0906266
Audi A6 2.8E V6 Petrol 128 kW (174 HP) Stage 21995, Petrol, 128 kW (174 hp)
170 → 201 HP +31 HP +33 Nm 18% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.4i V6 170hp, BDV, 2.4L, Petrol. Engine #422 in our gains database.
- Power
- 201 HP+31 HP from 170
- Torque
- 263 Nm+33 Nm from 230
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 4A0906266.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Petrol.
Hardware
- Sport / decat downpipe (or sports-cat)
- High-flow air intake
- Optional: front-mount intercooler upgrade for sustained boost
Software / calibration
- Cat-warm-up & secondary lambda re-mapped for decat hardware
- Boost target raised in line with cooling capacity
- Knock / ignition advance re-trimmed
- Idle and load-transition tables refined
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A6 2 8e |
| Model year | 1995 |
| Fuel / Induction | Petrol |
| Factory power | 128 kW (174 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 4A0906266 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 2393 CC |
| Compression ratio | 10,5 : 1 |
| Bore × Stroke | 81,0 X 77,4 mm |
| OEM engine code | BDV |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 170 HP | 230 Nm | — | — |
| Stage 1 | 190 HP | 250 Nm | +20 (11.8%) | +20 |
| Stage 2 | 201 HP | 263 Nm | +31 (18.2%) | +33 |
| Stage 3 | 281 HP | 357 Nm | +111 (65.3%) | +127 |
| Stage 4 | 332 HP | 426 Nm | +162 (95.3%) | +196 |
About this calibration file
The Stage 2 calibration for the 1995 Audi A6 2 8e Petrol is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 4A0906266. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 201 HP and 263 Nm at the crank — a gain of +31 HP (18%) and +33 Nm over the factory 170 HP / 230 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
4A0906266 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for Audi A6 2.8E V6 1995 Benzin 128KW with Bosch 4A0906266. The base stock vehicle for this calibration has a factory output of around 128 kW (~174 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 4A0906266. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
8AB3DCD4 845124FD 869C891D 0F08B42B 593A132C DBC2193F 41792006 C91F7281