Stage 2
Stage 2 · Diesel · 3.0 TDI 233hp
Audi A6 3.0 TDI Stage 2 file Bosch · 4E0907401S · SW 377109
Audi A6 3.0 TDI Turbo Diesel 171.4 kW (233 HP) Stage 22006, Turbo diesel, 171.4 kW (233 hp)
233 → 331 HP +98 HP +212 Nm 42% more power
Calibrated ECU file for 4E0907401S (SW 377109). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 3.0 TDI 233hp, ASB, 3L, Diesel. Engine #440 in our gains database.
- Power
- 331 HP+98 HP from 233
- Torque
- 662 Nm+212 Nm from 450
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 4E0907401S and software 377109.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A6 |
| Model year | 2006 |
| Displacement | 3.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 171.4 kW (233 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 4E0907401S |
| ECU software | 377109 |
| Calibration stage | Stage 2 |
| Cylinder capacity | 2967 CC |
| Compression ratio | 17,0 : 1 |
| Bore × Stroke | 83,0 X 91,4 mm |
| OEM engine code | ASB |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 233 HP | 450 Nm | — | — |
| Stage 1 | 280 HP | 575 Nm | +47 (20.2%) | +125 |
| Stage 2 | 331 HP | 662 Nm | +98 (42.1%) | +212 |
| Stage 3 | 350 HP | 698 Nm | +117 (50.2%) | +248 |
| Stage 4 | 419 HP | 833 Nm | +186 (79.8%) | +383 |
About this calibration file
The Stage 2 calibration for the 2006 Audi A6 3.0L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU and software version 377109. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 331 HP and 662 Nm at the crank — a gain of +98 HP (42%) and +212 Nm over the factory 233 HP / 450 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for Audi A6 3.0 TDI 2006 Turbo-Diesel 171.4KW with Bosch 4E0907401S (Bosch software number 377109 ( 1037377109 )). The base stock vehicle for this calibration has a factory output of around 171.4 kW (~233 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 4E0907401S, 377109 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
3034080D C4C82DB0 2904FBA8 584D7B53 D0F14EA7 0EC888AD 0667C35B 96484A46