Stage 1
Stage 1 · Diesel · 2.5 TDI 140hp
Volvo V70 2.5 TDI Stage 1 file Bosch HW 0281001776
Volvo V70 2.5 TDI Turbo Diesel 103 kW (140 HP) Stage 11998, Turbo diesel, 103 kW (140 hp)
140 → 170 HP +30 HP +60 Nm 21% more power
Calibrated ECU file for 0281001776. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 2.5 TDI 140hp, D5252T, 2.5L, Diesel. Engine #8387 in our gains database.
- Power
- 170 HP+30 HP from 140
- Torque
- 350 Nm+60 Nm from 290
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281001776.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Volvo |
|---|---|
| Vehicle model | V70 |
| Model year | 1998 |
| Displacement | 2.5 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 103 kW (140 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281001776 |
| ECU software | 09470429 |
| Calibration stage | Stage 1 |
| Cylinder capacity | 2461 CC |
| Compression ratio | 20,5 : 1 |
| Bore × Stroke | 81,0 X 95,5 mm |
| OEM engine code | D5252T |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 140 HP | 290 Nm | — | — |
| Stage 1 | 170 HP | 350 Nm | +30 (21.4%) | +60 |
| Stage 2 | 179 HP | 364 Nm | +39 (27.9%) | +74 |
| Stage 3 | 210 HP | 450 Nm | +70 (50%) | +160 |
| Stage 4 | 252 HP | 537 Nm | +112 (80%) | +247 |
About this calibration file
The Stage 1 calibration for the 1998 Volvo V70 2.5L Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number 0281001776 and software version 09470429. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 170 HP and 350 Nm at the crank — a gain of +30 HP (21%) and +60 Nm over the factory 140 HP / 290 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281001776 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for Volvo V70 2.5 TDI 1998 Turbodiesel 103KW with Bosch 0281001776 and software ID 28SA3886. The base stock vehicle for this calibration has a factory output of around 103 kW (~140 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281001776, 28SA3886. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
F906C5E3 7287971E B769E468 E94DA1BE 0A157ACA 59BA1774 EC5CF704 ABC613CF