Original file
Original / Factory · Diesel · 30 TDI (2.0D) 136hp
Original ECU File – Audi A6 C6 2.0 TDI 140 HP (103 kW (140 HP)) – original file Bosch · 03G906016GB · SW 1037380438
Original ECU File – Audi A6 C6 2.0 TDI 140 HP (103 kW (140 HP)) –136 HP Factory calibration Stock backup file, 320 Nm, Diesel
Calibrated ECU file for 03G906016GB. Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 30 TDI (2.0D) 136hp, 2L, Diesel. Engine #479 in our gains database.
- Power
- 136 HPfactory calibration
- Torque
- 320 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 03G906016GB and software 380438.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | A6 Kw |
| ECU manufacturer | Bosch |
| ECU hardware | 1037380438 |
| ECU software | 03G906016GB |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1968 CC |
| Compression ratio | 16,0 : 1 |
| Bore × Stroke | 81,0 X 95,5 mm |
| OEM engine code | 30 TDI (2.0D) 136hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 136 HP | 320 Nm | — | — |
| Stage 1 | 185 HP | 400 Nm | +49 (36%) | +80 |
| Stage 2 | 193 HP | 470 Nm | +57 (41.9%) | +150 |
| Stage 3 | 204 HP | 496 Nm | +68 (50%) | +176 |
| Stage 4 | 245 HP | 592 Nm | +109 (80.1%) | +272 |
About this calibration file
This is the factory (original) ECU calibration for the Audi A6 Kw, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 1037380438 and software version 03G906016GB. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
1037380438 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
Original ECU File – Audi A6 C6 2.0 TDI 140HP (103 kW) – Bosch 03G906016GB – SW 380438
This product contains a complete original ECU backup (stock file) for Audi A6 C6 2.0 TDI 140HP / 103 kW with Bosch 03G906016GB (Bosch software number 380438 / 1037380438). Ideal for ECU cloning, restoring to stock and as a safe base for future remaps.
This backup is a 100% original stock ECU file for Audi A6 C6 2.0 TDI (140 HP / 103 kW) with Bosch 03G906016GB, SW 380438 (1037380438). Use it for professional cloning, diagnostics, memory recovery after corruption, or as a verified stock baseline for custom remaps.
- Compatibility: Audi A6 C6 2.0 TDI engines using Bosch 03G906016GB (verify ECU hardware ID before use).
- Read method: Full flash + EEPROM where applicable. File prepared for professional tools and ECU cloning workflows.
- Use caution: Always verify checksum and ECU IDs after write-back. Keep original backup file securely.
File
E689B805 434511E4 A4A072E3 BA22245B 97D39665 C7093979 DA3FA358 A6F915E8