Original file
Original / Factory · Diesel · 3.0 TDI 233hp
Audi Q7 3.0 L original file Bosch · 4L0907401 · SW 379749
Audi Q7 3.0 L Turbo Diesel 164.8 kW (224 HP) Original2006, Turbo diesel, 164.8 kW (224 hp)
233 HP Factory calibration Stock backup file, 500 Nm, Diesel
Calibrated ECU file for (SW 379749). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 3.0 TDI 233hp, BUG, 3L, Diesel. Engine #610 in our gains database.
- Power
- 233 HPfactory calibration
- Torque
- 500 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 4L0907401 and software 379749.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | Q7 |
| Model year | 2006 |
| Displacement | 3.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 164.8 kW (224 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 4L0907401 |
| ECU software | 379749 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2967 CC |
| Compression ratio | 17,0 : 1 |
| Bore × Stroke | 83,0 X 91,4 mm |
| OEM engine code | BUG |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 233 HP | 500 Nm | — | — |
| Stage 1 | 285 HP | 580 Nm | +52 (22.3%) | +80 |
| Stage 2 | 295 HP | 600 Nm | +62 (26.6%) | +100 |
| Stage 3 | 350 HP | 775 Nm | +117 (50.2%) | +275 |
| Stage 4 | 419 HP | 925 Nm | +186 (79.8%) | +425 |
About this calibration file
This is the factory (original) ECU calibration for the 2006 Audi Q7 3.0L Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 4L0907401 and software version 379749. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
4L0907401 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi Q7 3.0 L 2006 Turbodiesel 164.8KW with Bosch 4L0907401 (Bosch software number 379749 ( 1037379749 )). This original file corresponds to a factory engine output of approximately 164.8 kW (~224 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 4L0907401, 379749 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
C996FC50 779FB289 5D32A544 D8818F71 D8FD9787 F227B98D A83AAB7D 15E009F5