Original file
Original / Factory · Petrol · 4.2 V8 344hp
Audi S4 4.2 V8 original file Siemens HW 0261208666 · 8E0907560 · SW 375089
Audi S4 4.2 V8 Petrol 253 kW (344 HP) Original2004, Petrol, 253 kW (344 hp)
344 HP Factory calibration Stock backup file, 410 Nm, Petrol
Calibrated ECU file for 0261208666 (SW 375089). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 4.2 V8 344hp, BBK, 4.2L, Petrol. Engine #681 in our gains database.
- Power
- 344 HPfactory calibration
- Torque
- 410 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261208666 and software 375089.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | S4 |
| Model year | 2004 |
| Displacement | 4.2 L |
| Fuel / Induction | Petrol |
| Factory power | 253 kW (344 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | 0261208666 |
| ECU software | 375089 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 4163 CC |
| Compression ratio | 11,0 : 1 |
| Bore × Stroke | 84,5 X 92,8 mm |
| OEM engine code | BBK |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 344 HP | 410 Nm | — | — |
| Stage 1 | 364 HP | 440 Nm | +20 (5.8%) | +30 |
| Stage 2 | 380 HP | 445 Nm | +36 (10.5%) | +35 |
| Stage 3 | 568 HP | 636 Nm | +224 (65.1%) | +226 |
| Stage 4 | 671 HP | 759 Nm | +327 (95.1%) | +349 |
About this calibration file
This is the factory (original) ECU calibration for the 2004 Audi S4 4.2L Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number 0261208666 and software version 375089. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261208666 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi S4 4.2 V8 2004 Benzin 253KW with Siemens 0261208666 and software ID 8E0907560 (Bosch software number 375089 ( 1037375089 )). This original file corresponds to a factory engine output of approximately 253 kW (~344 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261208666, 8E0907560, 375089 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
8EB69A99 DC322B96 ECF133C4 8C6491CE 192E0C4F 1466CCCC EC4CC646 95C8CCBF