Original file
Original / Factory · Petrol · 5.2 FSI V10 435hp
Audi S6 5.2 FSI V8 original file Bosch HW 0261S02297 · 4F1907552 · SW 387488
Audi S6 5.2 FSI V8 Petrol 319.9 kW (435 HP) Original2011, Petrol, 319.9 kW (435 hp)
435 HP Factory calibration Stock backup file, 540 Nm, Petrol
Calibrated ECU file for 0261S02297 (SW 387488). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 5.2 FSI V10 435hp, BXA, 5.2L, Petrol. Engine #693 in our gains database.
- Power
- 435 HPfactory calibration
- Torque
- 540 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261S02297 and software 387488.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | S6 |
| Model year | 2011 |
| Displacement | 5.2 L |
| Fuel / Induction | FSI |
| Factory power | 319.9 kW (435 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261S02297 |
| ECU software | 387488 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 5204 CC |
| Compression ratio | 12,5 : 1 |
| Bore × Stroke | 84,5 X 92,8 mm |
| OEM engine code | BXA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 435 HP | 540 Nm | — | — |
| Stage 1 | 455 HP | 565 Nm | +20 (4.6%) | +25 |
| Stage 2 | 482 HP | 593 Nm | +47 (10.8%) | +53 |
| Stage 3 | 718 HP | 837 Nm | +283 (65.1%) | +297 |
| Stage 4 | 848 HP | 999 Nm | +413 (94.9%) | +459 |
About this calibration file
This is the factory (original) ECU calibration for the 2011 Audi S6 5.2L FSI, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261S02297 and software version 387488. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261S02297 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for Audi S6 5.2 FSI V8 2011 Benzin 319.9KW with Bosch 0261S02297 and software ID 4F1907552 (Bosch software number 387488 ( 1037387488 )). This original file corresponds to a factory engine output of approximately 319.9 kW (~435 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261S02297, 4F1907552, 387488 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
F85A186D 6BE67A2F 9CE4C62C 7ED64A2F F249A469 D15278D9 2F50D248 19B0A58A