Stage 2
Stage 2 · Diesel · 45 TDI (3.0D) 231hp
Audi V6 EDC16 A6 V6 TDI EDC16 3.0 Stage 2 file Bosch
Audi V6 EDC 16 A6 V6 TDI EDC 16 3.0 Turbo Diesel 171.4 kW (233 HP) Stage 22002, Turbo diesel, 171.4 kW (233 hp)
231 → 291 HP +60 HP +134 Nm 26% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 45 TDI (3.0D) 231hp, 3L, Diesel. Engine #483 in our gains database.
- Power
- 291 HP+60 HP from 231
- Torque
- 634 Nm+134 Nm from 500
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
The numbers in your read must be the ones listed on this page.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Diesel.
Hardware
- Sport / decat downpipe (or DPF removal where legally permitted off-road)
- High-flow air intake (recommended)
- Optional: catback exhaust for lower backpressure
Software / calibration
- DPF / EGR / AdBlue switched off in software (where lawful)
- Boost & rail pressure raised to match new airflow
- Smoke limiter relaxed in line with hardware
- Lambda + EGT safeties retuned
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | Audi |
|---|---|
| Vehicle model | V6 Edc16 A6 |
| Model year | 2002 |
| Displacement | 3.0 L |
| Fuel / Induction | Turbo Diesel |
| Factory power | 171.4 kW (233 HP) |
| ECU manufacturer | Bosch |
| Calibration stage | Stage 2 |
| OEM engine code | 45 TDI (3.0D) 231hp |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 231 HP | 500 Nm | — | — |
| Stage 1 | 277 HP | 610 Nm | +46 (19.9%) | +110 |
| Stage 2 | 291 HP | 634 Nm | +60 (26%) | +134 |
| Stage 3 | 347 HP | 775 Nm | +116 (50.2%) | +275 |
| Stage 4 | 416 HP | 925 Nm | +185 (80.1%) | +425 |
About this calibration file
The Stage 2 calibration for the 2002 Audi V6 Edc16 A6 3.0L Turbo Diesel is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 291 HP and 634 Nm at the crank — a gain of +60 HP (26%) and +134 Nm over the factory 231 HP / 500 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage2 tuning file for Audi V6 EDC16 A6 V6 TDI EDC16 3.0 2002 Turbodiesel 171.4KW with Bosch . The base stock vehicle for this calibration has a factory output of around 171.4 kW (~233 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number the ECU part number in the product title.Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E8968EAA B0F393B8 BDFD01B6 9BBD8184 D3FE43F0 759562E8 6BEA59AC 1FBA62EE