Stage 1
Stage 1 · Petrol · 316i 122hp
BMW E30 325 Eta Stage 1 file Bosch
BMW E30 325 Eta Petrol 91.9 kW (125 HP) Stage 1Petrol, 91.9 kW (125 hp)
122 → 136 HP +14 HP +17 Nm 11% more power
Calibrated ECU file . Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 316i 122hp, N43B16AA, 1.6L, Petrol. Engine #845 in our gains database.
- Power
- 136 HP+14 HP from 122
- Torque
- 177 Nm+17 Nm from 160
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 02612.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E30 325 Eta |
| Fuel / Induction | Petrol |
| Factory power | 91.9 kW (125 HP) |
| ECU manufacturer | Bosch |
| ECU ID | 02612.027 |
| Calibration stage | Stage 1 |
| OEM engine code | N43B16AA |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 122 HP | 160 Nm | — | — |
| Stage 1 | 136 HP | 177 Nm | +14 (11.5%) | +17 |
| Stage 2 | 144 HP | 186 Nm | +22 (18%) | +26 |
| Stage 3 | 201 HP | 248 Nm | +79 (64.8%) | +88 |
| Stage 4 | 238 HP | 296 Nm | +116 (95.1%) | +136 |
About this calibration file
The Stage 1 calibration for the BMW E30 325 Eta Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 136 HP and 177 Nm at the crank — a gain of +14 HP (11%) and +17 Nm over the factory 122 HP / 160 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for BMW E30 325 Eta Benzin 91.9KW with Bosch 02612.027. The base stock vehicle for this calibration has a factory output of around 91.9 kW (~125 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 02612.027. Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
E15C5B06 D6A6E510 52316D9A 81AD316C EF475EC5 9D63376A 9D548928 67B495AA