Original file
Original / Factory · Petrol · 316i 115hp
BMW E36 318i original file Bosch HW 0261203278 · SW 357983
BMW E36 318i 83.8 kW (114 HP) Original2004, 83.8 kW (114 hp)
115 HP Factory calibration Stock backup file, 175 Nm, Petrol
Calibrated ECU file for 0261203278 (SW 357983). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 316i 115hp, N42B16, 1.9L, Petrol. Engine #832 in our gains database.
- Power
- 115 HPfactory calibration
- Torque
- 175 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261203278 and software 357983.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E36 318i |
| Model year | 2004 |
| Factory power | 83.8 kW (114 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261203278 |
| ECU software | 357983 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1895 CC |
| Compression ratio | 9,7 : 1 |
| Bore × Stroke | 85,0 X 83,5 mm |
| OEM engine code | N42B16 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 115 HP | 175 Nm | — | — |
| Stage 1 | 126 HP | 192 Nm | +11 (9.6%) | +17 |
| Stage 2 | 134 HP | 202 Nm | +19 (16.5%) | +27 |
| Stage 3 | 190 HP | 271 Nm | +75 (65.2%) | +96 |
| Stage 4 | 224 HP | 324 Nm | +109 (94.8%) | +149 |
About this calibration file
This is the factory (original) ECU calibration for the 2004 BMW E36 318i, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0261203278 and software version 357983. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261203278 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E36 318i 2004 83.8KW with Bosch 0261203278 (Bosch software number 357983 ( 1037357983 )). This original file corresponds to a factory engine output of approximately 83.8 kW (~114 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261203278, 357983 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
DB2211E2 D56F624D 38745986 DB705CE1 18E8B927 8BCF6D1F ED8E62DE DC49249D