Skip to the content
TunerSuite The white-label ECU file portal, for one shop or a whole network File service · upload 24/7 WhatsApp Client portal
Cart Open the demo
BMW 3-series E36
  1. Home
  2. I need a file
  3. ECU files
  4. BMW
  5. BMW E36

Instant download

BMW E36 318TDS Stage 1 file Bosch HW 0281001711 · SW 357658

Turbo diesel · 90 hp (66 kW)

Share WhatsApp Facebook

BMW 3-series E36 1991–2001

Dyno sheet

Power
116 hp +26
Torque
249 Nm +59
Power and torque: Stock and Stage 1Power in hp on the left scale, torque in Nm on the right, over the engine speed in rpm. Typical curves for this engine.003875751501132251503001000200030004000hpNmrpm
Stock Stage 1 Power Torque

Typical crank figures for a healthy 318 TDS E36. Results depend on the car's condition, fuel and parts.

Power
90 hp 66 kW
ECU
Bosch
Engine
318 TDS E36 Turbo diesel
File
64 KB BIN, ready to write

Bosch on the BMW E36 318TDS

Software and hardware

Hardware
0281001711 Bosch's number for the ECU itself, on its label printed 0 281 001 711
Software
357658 (1037357658) The software inside: your read must show this number

Check your read against this file

Built on request for the BMW E36 318TDS

  • DPF off
  • EGR off
  • DTC off
  • Speed limiter (Vmax) off
  • Swirl flaps off

Request a custom solution Any file £50, from £30 in packs, every option in the one price.

Is this the file for your read?

Drop your read and we compare it with this file, number by number. It stays private.

Send a custom file request

From read to write

  1. Read the ECUKeep the read: it is your way back.
  2. Match the numbershardware 0281001711 and software 357658
  3. Pay and downloadThe file is in your account straight away.
  4. Write it backThe way you read it. Not right for your car? We correct it free.
Before you write the file
  • A battery charger on the car: a write takes minutes and the voltage must not drop.
  • Your own read saved twice, on two different drives: it is your way back.
  • Your read shows hardware 0281001711 and software 357658 (1037357658), the same as this file.
  • Fault codes read and noted before the write, and cleared after it.
  • The same tool and connection you read the ECU with.

About this file

What this Stage 1 file is

This is a Stage 1 tune of the factory calibration of the BMW E36 318TDS (66 kW, 90 hp), for its Bosch ECU with hardware 0281001711 and software 357658 (1037357658). Stage 1 is software only: the car keeps its standard turbo, injectors, intercooler and exhaust.

Stage 1 on the 318 TDS E36 raises the injected fuel, the boost and the rail pressure and lifts the torque limiters, within what the standard turbo, injectors and clutch hold. The smoke limiter follows the new airflow, so a healthy engine pulls harder without black smoke.

The BMW E36 318TDS carries the 318 TDS E36 engine, 90 hp and 190 Nm from the factory. On this engine, Stage 1 usually gives about 116 hp and 249 Nm (+26 hp, +59 Nm). Typical figures for a healthy engine: your car's own result depends on its condition, fuel and parts.

For software 357658 of the BMW E36 318TDS we sell the original and Stage 1, each made from the same original read. Every file downloads straight after payment.

Read the Bosch ECU with your usual tool and keep the read: compare its hardware and software numbers with the ones on this page before you write the file.

DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off can be added to this file on request, for off-road and competition use: send us your read through our file service and our engineers add them (any file £50, from £30 in packs).

Hardware 0281001711 is the number on the Bosch ECU's label. Software 357658 (1037357658) is the calibration inside it: a read with hardware 0281001711 and another software number needs a different file.

Questions

Which ECU does this BMW E36 318TDS Stage 1 file fit?

A Bosch ECU with hardware 0281001711 and software 357658 (1037357658). Check those numbers in your read before you write it; another software number needs another file, which our engineers can build from your read.

How is the Bosch ECU read and written?

With your usual reading tool, over OBD or on the bench as the tool allows. Write the file back the same way you read the ECU, and keep your original read.

What does Stage 1 give on the BMW E36 318TDS?

Usually about 116 hp and 249 Nm against 90 hp and 190 Nm stock (+26 hp, +59 Nm). Typical for a healthy engine, never a promise for one car.

Can you add DPF off and EGR off to the Bosch ECU file?

Yes, on request, for off-road and competition use: DPF off, EGR off, DTC off, speed limiter (Vmax) off and swirl flaps off. Upload a read through our file service and an engineer builds it (any file £50, from £30 in packs). The buyer is responsible for using it where the law allows.

What exactly is in the download?

A BIN file of 64 KB, ready to write. Write it with the same tool and the same connection you read the ECU with.

How do I get the file after paying?

It is in your account as an instant download straight after payment by card, Apple Pay or Google Pay: the BIN file, ready to write.

What if the file does not fit my car?

Send us your read and we correct it free, as many times as it takes. Questions before you buy are answered by a tuner on WhatsApp.

I need a file

A file for the car in front of you

Our engineers tune your read, or the file is already in the library.

Upload a read