Stage 2
Stage 2 · Petrol · 328i 2800 24v 193hp
BMW E36 325i Stage 2 file Bosch HW 0261200413 · SW 357623
BMW E36 325i Petrol 140.5 kW (191 HP) Stage 21995, Petrol, 140.5 kW (191 hp)
193 → 222 HP +29 HP +37 Nm 15% more power
Calibrated ECU file for 0261200413 (SW 357623). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 328i 2800 24v 193hp, M52B28, Petrol. Engine #9443 in our gains database.
- Power
- 222 HP+29 HP from 193
- Torque
- 317 Nm+37 Nm from 280
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0261200413 and software 357623.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 2, Petrol.
Hardware
- Sport / decat downpipe (or sports-cat)
- High-flow air intake
- Optional: front-mount intercooler upgrade for sustained boost
Software / calibration
- Cat-warm-up & secondary lambda re-mapped for decat hardware
- Boost target raised in line with cooling capacity
- Knock / ignition advance re-trimmed
- Idle and load-transition tables refined
Stage 2 keeps the factory turbo and internals. Final figures vary slightly with the exact hardware fitted.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E36 325i |
| Model year | 1995 |
| Fuel / Induction | Petrol |
| Factory power | 140.5 kW (191 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0261200413 |
| ECU software | 357623 |
| Calibration stage | Stage 2 |
| OEM engine code | M52B28 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 193 HP | 280 Nm | — | — |
| Stage 1 | 209 HP | 302 Nm | +16 (8.3%) | +22 |
| Stage 2 | 222 HP | 317 Nm | +29 (15%) | +37 |
| Stage 3 | 318 HP | 434 Nm | +125 (64.8%) | +154 |
| Stage 4 | 376 HP | 518 Nm | +183 (94.8%) | +238 |
About this calibration file
The Stage 2 calibration for the 1995 BMW E36 325i Petrol is written for vehicles with supporting bolt-ons: a higher-flow downpipe or sports catalyst, upgraded intercooler and upgraded intake are recommended. Boost targets, fuel-rail pressure, injector duration and VGT positioning are pushed further than a Stage 1 map while keeping exhaust-gas temperatures inside safe bands.
This file matches a Bosch ECU with hardware number 0261200413 and software version 357623. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 222 HP and 317 Nm at the crank — a gain of +29 HP (15%) and +37 Nm over the factory 193 HP / 280 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0261200413 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage2 tuning file for BMW E36 325i 1995 Benzin 140.5KW with Bosch 0261200413 (Bosch software number 357623 ( 1037357623 )). The base stock vehicle for this calibration has a factory output of around 140.5 kW (~191 HP). Stage 2 is intended for cars with supporting modifications (exhaust, intake, intercooler) and delivers a stronger performance gain.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0261200413, 357623 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
A7358462 EDD817A6 22D780CD 54C1B60A 814E7220 ABB8F2C0 5F62C239 CDFAC88A