Stage 3
Stage 3 · Diesel · 740D 245hp
BMW E38 740D Stage 3 file Bosch HW 0281010844 · SW 351087
BMW E38 740D Turbo Diesel 180.2 kW (245 HP) Stage 32000, Turbo diesel, 180.2 kW (245 hp)
245 → 368 HP +123 HP +308 Nm 50% more power
Calibrated ECU file for 0281010844 (SW 351087). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 740D 245hp, 398D1, 3.9L, Diesel. Engine #1042 in our gains database.
- Power
- 368 HP+123 HP from 245
- Torque
- 868 Nm+308 Nm from 560
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281010844 and software 351087.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 3, Diesel.
Hardware
- Hybrid or larger turbocharger
- Upgraded injectors (matched flow rate)
- Front-mount intercooler upgrade
- Sport / decat downpipe + free-flow exhaust
- High-flow air intake
- Uprated clutch (manual gearbox)
Software / calibration
- Custom map dialled to the installed turbo, injector and intercooler spec
- Boost, fuelling, ignition / injection timing rebuilt around the new hardware
- All safety limits (knock, EGT, lambda, rail) re-tuned to match
- Drivability and torque-by-gear shaped to match the hardware
Stage 3 is hardware-matched. Send your turbo / injector / intercooler / clutch spec at checkout so the file is calibrated to YOUR build: typical projection above is a guide, final dyno depends on installed hardware.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E38 740d |
| Model year | 2000 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 180.2 kW (245 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281010844 |
| ECU software | 351087 |
| Calibration stage | Stage 3 |
| Cylinder capacity | 3901 CC |
| Compression ratio | 18,0 : 1 |
| Bore × Stroke | 84,0 X 88,0 mm |
| OEM engine code | 398D1 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 245 HP | 560 Nm | — | — |
| Stage 1 | 274 HP | 630 Nm | +29 (11.8%) | +70 |
| Stage 2 | 348 HP | 823 Nm | +103 (42%) | +263 |
| Stage 3 | 368 HP | 868 Nm | +123 (50.2%) | +308 |
| Stage 4 | 441 HP | 1036 Nm | +196 (80%) | +476 |
About this calibration file
The Stage 3 calibration for the 2000 BMW E38 740d Turbo Diesel targets a hardware-upgraded setup — hybrid or larger turbocharger, upgraded injectors, high-flow fuelling and in most cases a full exhaust. Maps are redrawn for the new airflow envelope with re-scaled MAF/MAP, torque limiters, smoke limiters and boost PID re-tuned.
This file matches a Bosch ECU with hardware number 0281010844 and software version 351087. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 368 HP and 868 Nm at the crank — a gain of +123 HP (50%) and +308 Nm over the factory 245 HP / 560 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281010844 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage3 tuning file for BMW E38 740D 2000 Turbodiesel 180.2KW with Bosch 0281010844 (Bosch software number 351087 ( 1037351087 )). The base stock vehicle for this calibration has a factory output of around 180.2 kW (~245 HP). This high-stage file targets heavily modified setups (bigger turbo, injectors etc.) and should be used by experienced tuners only.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281010844, 351087 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
41FCBF22 48D27574 F28CEAC4 A284F119 B065509E 50F28B59 35D910F4 34422E48