Stage 1
Stage 1 · Petrol · 320si 173hp
BMW E46 320i Stage 1 file Siemens · SW 430037
BMW E46 320i Petrol 128 kW (174 HP) Stage 12000, Petrol, 128 kW (174 hp)
173 → 185 HP +12 HP +20 Nm 7% more power
Calibrated ECU file for (SW 430037). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 320si 173hp, N45B20A, Petrol. Engine #9457 in our gains database.
- Power
- 185 HP+12 HP from 173
- Torque
- 220 Nm+20 Nm from 200
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Siemens and software 430037.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Petrol.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost / load targets optimised within factory hardware limits
- Ignition advance refined for the running fuel grade
- Throttle response and torque request remapped
- Factory safeties (knock, lambda, EGT) preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E46 320i |
| Model year | 2000 |
| Fuel / Induction | Petrol |
| Factory power | 128 kW (174 HP) |
| ECU manufacturer | Siemens |
| ECU software | 430037 |
| Calibration stage | Stage 1 |
| OEM engine code | N45B20A |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 173 HP | 200 Nm | — | — |
| Stage 1 | 185 HP | 220 Nm | +12 (6.9%) | +20 |
| Stage 2 | 196 HP | 231 Nm | +23 (13.3%) | +31 |
| Stage 3 | 285 HP | 310 Nm | +112 (64.7%) | +110 |
| Stage 4 | 337 HP | 370 Nm | +164 (94.8%) | +170 |
About this calibration file
The Stage 1 calibration for the 2000 BMW E46 320i Petrol is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Siemens ECU and software version 430037. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 185 HP and 220 Nm at the crank — a gain of +12 HP (7%) and +20 Nm over the factory 173 HP / 200 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a calibrated Stage1 tuning file for BMW E46 320i 2000 Benzin 128KW with Siemens Siemens (Bosch software number 430037 ( 1037430037 )). The base stock vehicle for this calibration has a factory output of around 128 kW (~174 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Siemens, 430037 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
F22376BC 122EE0E4 8367C158 A443F65F 79D45A8B F1081963 7C0545FF D6DA526F