Original file
Original / Factory · Petrol · 320i 170hp
BMW E46 320i original file Siemens · SW 430064
BMW E46 320i Petrol 125 kW (170 HP) Original2004, Petrol, 125 kW (170 hp)
170 HP Factory calibration Stock backup file, 210 Nm, Petrol
Calibrated ECU file for (SW 430064). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 320i 170hp, M54B22, 2L, Petrol. Engine #838 in our gains database.
- Power
- 170 HPfactory calibration
- Torque
- 210 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware Siemens and software 430064.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E46 320i |
| Model year | 2004 |
| Fuel / Induction | Petrol |
| Factory power | 125 kW (170 HP) |
| ECU manufacturer | Siemens |
| ECU software | 430064 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 1991 CC |
| Compression ratio | 11,0 : 1 |
| Bore × Stroke | 80,0 X 66,0 mm |
| OEM engine code | M54B22 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 170 HP | 210 Nm | — | — |
| Stage 1 | 185 HP | 230 Nm | +15 (8.8%) | +20 |
| Stage 2 | 196 HP | 242 Nm | +26 (15.3%) | +32 |
| Stage 3 | 281 HP | 326 Nm | +111 (65.3%) | +116 |
| Stage 4 | 332 HP | 389 Nm | +162 (95.3%) | +179 |
About this calibration file
This is the factory (original) ECU calibration for the 2004 BMW E46 320i Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU and software version 430064. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
Product details
This product contains a complete original ECU backup (stock file) for BMW E46 320i 2004 Benzin 125KW with Siemens Siemens (Bosch software number 430064 ( 1037430064 )). This original file corresponds to a factory engine output of approximately 125 kW (~170 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as Siemens, 430064 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
7950E5A9 76D2957C 44BAA481 3EB05F85 EBD9693C 1111BCF5 005C25B1 AE3B2BEB