Original file
Original / Factory · Diesel · 30d 3000 D 232hp
BMW E70 X5-3.0D original file Bosch HW 0281014437 · SW 387340
BMW E70 X5-3.0D Turbo Diesel 171.4 kW (233 HP) Original2007, Turbo diesel, 171.4 kW (233 hp)
232 HP Factory calibration Stock backup file, 541 Nm, Diesel
Calibrated ECU file for 0281014437 (SW 387340). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 30d 3000 D 232hp, M57D30TU2, Diesel. Engine #9684 in our gains database.
- Power
- 232 HPfactory calibration
- Torque
- 541 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 0281014437 and software 387340.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Diesel.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E70 X5 |
| Model year | 2007 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 171.4 kW (233 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | 0281014437 |
| ECU software | 387340 |
| Calibration stage | Original (Factory) |
| OEM engine code | M57D30TU2 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 232 HP | 541 Nm | — | — |
| Stage 1 | 286 HP | 652 Nm | +54 (23.3%) | +111 |
| Stage 2 | 329 HP | 795 Nm | +97 (41.8%) | +254 |
| Stage 3 | 348 HP | 839 Nm | +116 (50%) | +298 |
| Stage 4 | 418 HP | 1001 Nm | +186 (80.2%) | +460 |
About this calibration file
This is the factory (original) ECU calibration for the 2007 BMW E70 X5 Turbo Diesel, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Bosch ECU with hardware number 0281014437 and software version 387340. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
0281014437 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E70 X5-3.0D 2007 Turbodiesel 171.4KW with Bosch 0281014437 and software ID 56NT67 (Bosch software number 387340 ( 1037387340 )). This original file corresponds to a factory engine output of approximately 171.4 kW (~233 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 0281014437, 56NT67, 387340 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
7AD12A06 B0CFD9D7 06084910 31F0BF63 5E508659 834F144E A3BA7C80 A08B75B9