Stage 1
Stage 1 · Diesel · 30d 3000 D 232hp
BMW E70 X5-3.0D Stage 1 file Bosch · SW 500776
BMW E70 X5-3.0D Turbo Diesel 169.2 kW (230 HP) Stage 12007, Turbo diesel, 169.2 kW (230 hp)
232 → 286 HP +54 HP +111 Nm 23% more power
Calibrated ECU file for (SW 500776). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 30d 3000 D 232hp, M57D30TU2, Diesel. Engine #9684 in our gains database.
- Power
- 286 HP+54 HP from 232
- Torque
- 652 Nm+111 Nm from 541
- Fuel economy
- −8 %−12% full load
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware O and software 500776.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Stage 1, Diesel.
Hardware
- No hardware changes required: runs on completely stock hardware
Software / calibration
- Boost pressure optimised within factory turbo limits
- Injection timing & quantity remapped
- Smoke / EGT limiters refined
- DTCs left intact, factory safeties preserved
Stage 1 is a software-only calibration. Compatible with stock turbo, injectors, intercooler, exhaust and clutch.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E70 X5 |
| Model year | 2007 |
| Fuel / Induction | Turbo Diesel |
| Factory power | 169.2 kW (230 HP) |
| ECU manufacturer | Bosch |
| ECU hardware | D2UT87 |
| ECU software | 500776 |
| Calibration stage | Stage 1 |
| OEM engine code | M57D30TU2 |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 232 HP | 541 Nm | — | — |
| Stage 1 | 286 HP | 652 Nm | +54 (23.3%) | +111 |
| Stage 2 | 329 HP | 795 Nm | +97 (41.8%) | +254 |
| Stage 3 | 348 HP | 839 Nm | +116 (50%) | +298 |
| Stage 4 | 418 HP | 1001 Nm | +186 (80.2%) | +460 |
About this calibration file
The Stage 1 calibration for the 2007 BMW E70 X5 Turbo Diesel is a drop-in remap that works on completely stock hardware — no turbo, injector, intercooler or fuel-system upgrades required. Injection timing, boost targets, rail-pressure limits and torque maps are rebalanced to extract the safe headroom the OEM leaves untouched for fleet-fuel tolerance, altitude margin and warranty buffer.
This file matches a Bosch ECU with hardware number D2UT87 and software version 500776. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
Projected output on a healthy, stock-hardware example of this engine: 286 HP and 652 Nm at the crank — a gain of +54 HP (23%) and +111 Nm over the factory 232 HP / 541 Nm baseline. These numbers are sourced from our Vehicle Performance Database, which aggregates dyno results across this engine family. Real-world gains depend on fuel grade, ambient temperature, mechanical condition and intake/exhaust state.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
D2UT87 (Bosch) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a calibrated Stage1 tuning file for BMW E70 X5-3.0D 2007 Turbodiesel 169.2KW with Bosch O and software ID D2UT87 (Bosch software number 500776 ( 1037500776 )). The base stock vehicle for this calibration has a factory output of around 169.2 kW (~230 HP). This Stage 1 calibration is designed for stock hardware, offering a safe and reliable increase in power and torque for daily use.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as O, D2UT87, 500776 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
8D539760 5C41C6C8 BA9305DC F4E44630 D97A4BA3 D71A85BA 6E887B8C 417685F9