Original file
Original / Factory · Petrol · 335i - N55 Twinscroll - 306hp
BMW E90-E91- E92-E93 3.0i original file Siemens · SW 777227
BMW E90-E91- E92-E93 3.0i Turbo Petrol 225.1 kW (306 HP) Original2006, Turbo petrol, 225.1 kW (306 hp)
306 HP Factory calibration Stock backup file, 400 Nm, Petrol
Calibrated ECU file for (SW 777227). Checksum-corrected, ready to flash. Delivered instantly via secure download after payment.
Performance projection
Matched engine: 335i - N55 Twinscroll - 306hp, N55B30A, 3L, Petrol. Engine #861 in our gains database.
- Power
- 306 HPfactory calibration
- Torque
- 400 Nmfactory calibration
Real data from Gains API. Dyno curve = typical ECU-family projection. Final gains depend on fuel, altitude, wear.
How it works
-
Read your ECU
With KESS, KTAG, AutoTuner or Flex. Keep the read: it is your way back.
-
Match the numbers
Your read must show hardware 5WK93608 and software 777227.
-
Pay and download
Card, Apple Pay or Google Pay. The file is in your account straight away.
-
Write it and drive
Write it back the way you read it. Not right for your car? We correct it free.
What the car needs
Required modifications: Factory, Petrol.
Hardware
- Factory hardware: no modifications required
Software / calibration
- OEM calibration restored (recovery / immobiliser / coding work)
Original files are used to revert to factory state, repair after a faulty tune, or recover an ECU before service work.
Vehicle & ECU specifications
Exact vehicle, engine and ECU identifiers this calibration file is written for. Cross-check against your ECU before flashing.
| Vehicle make | BMW |
|---|---|
| Vehicle model | E90 E91 |
| Model year | 2006 |
| Fuel / Induction | Petrol |
| Factory power | 225.1 kW (306 HP) |
| ECU manufacturer | Siemens |
| ECU hardware | 5WK93608 |
| ECU software | 777227 |
| Calibration stage | Original (Factory) |
| Cylinder capacity | 2979 CC |
| Compression ratio | 10,2 : 1 |
| Bore × Stroke | 84,0 X 89,6 mm |
| OEM engine code | N55B30A |
| File format | BIN / ORI |
| Checksum | Pre-corrected (ready to flash) |
| Delivery | Instant download after payment |
Engine performance matrix
Power, torque and fuel-economy figures for every tuning stage on this engine, sourced from the tuning-database Gains API. Values are healthy-engine crank numbers; real on-road gains vary with fuel, altitude and mechanical condition.
| Stage | Power | Torque | Δ HP | Δ Nm |
|---|---|---|---|---|
| Original / Factory | 306 HP | 400 Nm | — | — |
| Stage 1 | 360 HP | 520 Nm | +54 (17.6%) | +120 |
| Stage 2 | 386 HP | 540 Nm | +80 (26.1%) | +140 |
| Stage 3 | 505 HP | 620 Nm | +199 (65%) | +220 |
| Stage 4 | 597 HP | 740 Nm | +291 (95.1%) | +340 |
About this calibration file
This is the factory (original) ECU calibration for the 2006 BMW E90 E91 Petrol, extracted from a genuine stock control unit. Use it as a verified backup before flashing any performance tune, or as a reference when recovering an ECU from a failed write.
This file matches a Siemens ECU with hardware number 5WK93608 and software version 777227. Verify both identifiers in your flashing tool before writing — an ID mismatch is the most common cause of a bricked ECU. If you are unsure, upload a read of your original file via the file-request wizard and our engineers will confirm compatibility before you flash.
The file is delivered as a ready-to-flash BIN (and ORI backup where applicable) compatible with all major tools — KESS V2/V3, KTAG, AutoTuner, CMDFlash, Dimsport New Genius, MPPS, Flex, BFlash, PCMFlash, MMFlash — via OBD, bench or boot-mode as supported by your ECU family. Checksums are pre-computed and verified; no additional checksum tool is required. All files include a free revision if post-flash logs reveal a fuelling, boost or EGT issue.
Frequently asked questions
5WK93608 (Siemens) listed in the specifications. Read your ECU with any supported tool (KESS, KTAG, AutoTuner, CMD, etc.) and compare the hardware + software numbers against the ones on this page. If they match exactly, the file is a direct fit. If you're not 100% sure, upload your original read via the file-request wizard and our engineers will confirm within minutes — no cost, no obligation.Product details
This product contains a complete original ECU backup (stock file) for BMW E90-E91- E92-E93 3.0i 2006 Turbo-Benzin 225.1KW with Siemens 5WK93608 (Bosch software number 777227 ( 1037777227 )). This original file corresponds to a factory engine output of approximately 225.1 kW (~306 HP). This file is ideal for ECU cloning, restoring the car back to stock and using it as a safe base for future remaps.
All ECU tuning files from TUNING-DATABASE are prepared for professional use. They are useful whenever you search by ECU ID, hardware or software number such as 5WK93608, 777227 (1037 + SW code). Use this file for diagnostics, cloning, recovery or as a base for custom remapping.
A64CF7E6 38A535A2 2DE2B945 8B959947 1FEFAD60 ACA294AC 38D8FC71 9BAF8D79